I have a Williams F7 conventional with dual dc can motors I was thinking of upgrading to tmcc via ERR. Can I add cruise to this or would cruise only work with single motors?
Thanks!
Original Post
Replies sorted oldest to newest
No problem with two motors. Some of us are using it to drive 6 motors. 4 motors are pretty common.
Pete
Thanks!
I recently upgraded my original Williams scale GG1 with two motors to TMCC with the ERR Cruise Commander. Here’s a photo of the completed install:
Attachments
Images (1)
Sweet. Thank You!
ERR Cruise Commanders are the easiest command conversion out there. I did my first one several years ago, sweating it until I got it done, a lot of advice from GunrunnerJohn in the process, but once you do one, it is a very simple install.
@Norton posted:No problem with two motors. Some of us are using it to drive 6 motors. 4 motors are pretty common.
I do recommend the tethered bridge if you go for more than two motors.
@gunrunnerjohn posted:I do recommend the tethered bridge if you go for more than two motors.
For sure. Not an issue here though.
Pete
I'm running a MTH Veranda which has 4 motors with my cruise commander and using a 12A bridge mounted on the frame, Working fine. j
