I have a fairly new Z1000 and the circuit breaker is stuck in the off position and it won't move. I've never taken one of these apart and it seems a special screw driver is needed. Any advise on whether I should try or is there no fix for it? Thanks Bum.
Replies sorted oldest to newest
You can open the case with a T10 Torx screwdriver. The breaker was available from MTH, but is out of stock. You can buy replacements on Amazon. They are soldered to the wires, so if you are comfortable doing that, the breaker is replaceable, or take it to and Authorized Tech.
Thank you Jon. I had to order the proper screwdriver and will let you know how it goes. Bum.
Jon. The screwdriver arrived, took it apart and removed the rocker frame, put it back together and it now works. I don't know why it now works but it does so thank you for your help.
Hi must of been a Gremlin in the works glad you chased him away!
Alan
Access to this requires an OGR Forum Supporting Membership
