Can the original command bases be repaired? I have not been able to get to the basement for the last 5 years. I have the command base attached to the MTH DSC system. I am now able to get to the basement, the green light lights up but it does not respond to the remote. I have new batteries in the remote so I know it is not a battery problem. Any help will be appreciated.
Bob Poline
Replies sorted oldest to newest
Does it respond (flashing light) to commands from the DCS remote? Does your CAB1 remote beep when pressing buttons?
How about telling us exactly what you have. It "sounds" like you have the original TMCC command base connected to the MTH TIU and are controlling it from the DCS Remote. If so, just pushing a button on the remote isn't going to get it. You have to first select a TMCC engine that you have loaded into the DCS remote, and then try to see if the command base sees the remote commands.
I have the original TMCC command base the red light does not blink and the remote does not beep.
Yes I do have the original TMCC command base attached to the MTH TIU. The base does not blink when I try to add a Lionel engine to the DCS.
Access to this requires an OGR Forum Supporting Membership
