Skip to main content

Did ERR come up with a puffing smoke unit or board? I want to get rid of the one in my Legacy K4, can't stand the noise. I wonder if if would be just plug and play or would require replacing the cruise unit.

 

Also, I spoke to a friend of mine today and he has both the Lionel Legacy 1361 and the Prewar 3667 and the former does not have the annoying smoke unit puffer while the latter does.

 

I guess this will be just another denial from Lionel. Too bad I really like the engine but can't stand the noise.

Original Post

Replies sorted oldest to newest

Try a little drop of oil on the motor bushing and if that does not help try to move the fan blades so they do not rub the housing as they spin. I did both to mine and it worked. The engine shell is easy to remove and the fan unit unplugs for easy removal. These are quite simple to put together. While it is apart I replaced the smoke wick with a new one.
Originally Posted by Lionelzwl2012:
Try a little drop of oil on the motor bushing and if that does not help try to move the fan blades so they do not rub the housing as they spin. I did both to mine and it worked. The engine shell is easy to remove and the fan unit unplugs for easy removal. These are quite simple to put together. While it is apart I replaced the smoke wick with a new one.

That was one thing that I might try. However, I'm not sure just a drop of oil will be a long term fix.

 

Someone posted that the new Mega Steam product has a lubricating effect so I may try that and stop using the Lionel smoke fluid.

Originally Posted by gunrunnerjohn:
Originally Posted by Trainman9:
Originally Posted by gunrunnerjohn:

ERR doesn't have a smoke unit, why not just replace the noisy motor in the K4? 

I'm not sure it is just the motor but I may try that first. They don't cost much.

I'm not sure what else would be making noise in a smoke unit.   The only noisy component I've ever found is the motor.

The K4 and the PRR U28c use the same motor.

 

The only difference seems to be that the K4 has an electrical pulse that causes the puffing. The U28c only streams the smoke out but does not puff and is not noisy.

 

Is your K4 noisy?

 

Originally Posted by gunrunnerjohn:

ERR doesn't have a smoke unit, why not just replace the noisy motor in the K4? 

It's not clear that it's available. If it is used in older engines, wouldn't it be listed as available? Or maybe you could buy an older engine's smoke unit whole if it uses the same motor.

Post
×
×
×
×
Link copied to your clipboard.
×
×