Skip to main content

8 replies

Lionel scale Harriman 2-8-0 PS3 conversion

L Lou1985OGR Forum Member

Just wondering but has anyone converted a Lionel scale Harriman 2-8-0 to PS3? I've found that the conventional version can be had cheap. This is the model I'm talking about: http://www.lionel.com/products...dation-2686-6-28037/ I know a command version was produced but by the time I buy a cruise commander M, supper chuffer, and chuff generator, plus a new fan driven smoke unit the cost of a PS3 kit and a MTH PS3 smoke unit ends up being cheaper. I want 4 chuffs per revolution and fan driven smoke, just like my MTH steam locomotives. Plus all my steam locomotives are DCS and diesels are TMCC, so I'd be sticking with a pattern .

Here is the parts diagram for the locomotive:  https://www.lionelsupport.com/...386-280376-28039.pdf

Looks like it uses a standard RS-385 motor with flywheel. I would just need a MTH smoke unit recommendation and it seems like it would be a fairly easy project.  

Last edited by Lou1985
Original Post

Replies sorted oldest to newest

L Lou1985OGR Forum Member
gunrunnerjohn posted:

FWIW, I have the Lionel Consolidation that has been upgraded to PS/2, and the large MTH steam smoke unit fit into it.

That's good to know. Did you happen to mount the smoke unit to the chassis or the inside of the shell? Also what MTH part number was the smoke unit you used? If you get a chance to take a picture I would appreciate it. I'm assuming the PS2 electronics fit fine in the Vanderbilt tender as well.

Last edited by Lou1985
L Lou1985OGR Forum Member
Norton posted:

I upgraded a later 2-8-0 that came with TMCC and Cruise but had a puffer unit. The replacement came from a Lionel 10 wheeler which is now listed as NLA. Posting to show the size you will be looking for. GGG likely knows an MTH unit similar to this.

Pete

Of course it's no longer available. 

The one chuff a revolution and puffer smoke unit are what kills the operating characteristics of the TMCC version for me. Well that and the 32 speed steps. Hence why I'd just buy the conventional one and upgrade it.

gunrunnerjohngunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER
Lou1985 posted:
gunrunnerjohn posted:

FWIW, I have the Lionel Consolidation that has been upgraded to PS/2, and the large MTH steam smoke unit fit into it.

That's good to know. Did you happen to mount the smoke unit to the chassis or the inside of the shell? Also what MTH part number was the smoke unit you used? If you get a chance to take a picture I would appreciate it. I'm assuming the PS2 electronics fit fine in the Vanderbilt tender as well.

I actually bought this one that someone else converted, it was just such a great deal that I jumped on it.

L Lou1985OGR Forum Member
gunrunnerjohn posted:
Lou1985 posted:
gunrunnerjohn posted:

FWIW, I have the Lionel Consolidation that has been upgraded to PS/2, and the large MTH steam smoke unit fit into it.

That's good to know. Did you happen to mount the smoke unit to the chassis or the inside of the shell? Also what MTH part number was the smoke unit you used? If you get a chance to take a picture I would appreciate it. I'm assuming the PS2 electronics fit fine in the Vanderbilt tender as well.

I actually bought this one that someone else converted, it was just such a great deal that I jumped on it.

You actually bought a piece someone else converted? I'm kinda surprised.

If you figure out what smoke unit is in it let me know. 

Add Reply

Views: 637
Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×