milk car patforms

Good question. The Fastrack operating track section has these removable pieces on either side of the roadbed. I do remember having to cut off the little pieces of plastic that you would snap the pieces back into to make it fit the platform. Don't know the number, but it was the Hoods Dairy operating milk car. I hope this helps.

Forgive me if you thought of this. A good alternative may be to buy Fastrack tubular adapter sections, and a regular operating track section.I

Bill

When I had Fastrack and the postwar milk cars and platform,  I removed the one side of the operating track.   Then a big hammer to flatten the part that held the tubular track.   It just became a big flat plate.  Set distance to edge of track.   I had straights on both sides of the operation track.  If there are curves, overhanging engines or cars will hit the platform.   Set the platform to the top height and then screw down the track when all adjusted.   I went to tubular so can't take a picture.

Here's a post on exactly the point in question, looks like you can use the unmodified milk platform.

https://ogrforum.com/...50#41271596156015950