Replacement wire for MTH tender

Shed some better light and physically hold what you broke so we can have a better look,….hard to see all what you need in the dark,…

Pat

Here is a better photo.

Well I fixed the green wire after more effort. I was able to splice the tip of the wire and reinsert it back into the female plug. Now I just need to find where I can buy the wiring harness tether BC-0000133 and I am good to go.

@The Cincinnatian posted:

Well I fixed the green wire after more effort. I was able to splice the tip of the wire and reinsert it back into the female plug. Now I just need to find where I can buy the wiring harness tether BC-0000133 and I am good to go.

Let’s see what your tether looks like, and We’ll try to recommend a suitable replacement….can you take a picture of it?…in the light too please,..and take pictures of both ends…

Pat

Pat, Here are some more photos. I know the MTH part number is BC0000133 but it is out of stock at MTH so looking for an alternative vendor. I am going to York so hoping to pick one up if not online somewhere.

There is no “ other vendor” for a direct replacement for your MTH Niagara, ….plus I doubt you’ll ever see that exact tether produced ever again ……beings your tether is still good, and just your outer jacket broke, I’d use this harness I have pictured here, and splice in the tail end that you need,….this is pretty much a universal repair tether. All you have to do is match color for color and go,…..naturally, double check your work with a DVM/multimeter…….

Pat

Pat has the answer, use the universal tender tether and just splice it in.

Thanks guys.

I can’t make this stuff up …..I was looking through my personal junk for something and came across this in my junk harness pile ……then I got to thinking I had converted one of my Niagaras to TMCC some time ago,…..talk about your once in a lifetime finds,….if this one looks like yours, contact me via profile …..

Pat

Pat - I sent you a PM. Was not able to review until I got off work.  Thanks so much!