Mute SW-l in DCS

Did you try a Feature Reset?  If that fails, go for the Factory Reset and re-add it to the remote.

I didn't try Factory Reset

I think I will give that a shot.

Richard,

If you have not tried a Feature Reset, then do so. A Factory Reset should not be necessary.

If a Feature Reset doesn't restore sounds, a Factory Reset might not, either.

Test  the battery in conventional when you have sound.......   turn off track power and sounds should continue on for 6 or 7 seconds.

Go back again to the sound menu and set to to full again....

 Just double check the remote hard  sound key... sound on. sound off.

Barry Broskowitz posted:

Richard,

If you have not tried a Feature Reset, then do so. A Factory Reset should not be necessary.

If a Feature Reset doesn't restore sounds, a Factory Reset might not, either.

Barry, as I suggested, I try the feature reset first.  It doesn't really hurt to do the factory reset after that if the first doesn't work.  I have had the factory reset restore things, perhaps it was the process of adding it back in, I can't say.

Richard, did you try a conventional reset?  Occasionally, that will spill over to command operation and affect things, worth a shot.  In conventional mode, five bells and one whistle, spaced at 1/2 second intervals.  You should get an acknowledgement if it's successful, the timing is fairly touchy on the button pushes.

Thanks guys, I will let you know what works

All will return with reset, or else ramp up volume.  G

Feature Reset did the job, thanks.  DSC is a great system but it sometimes hard to remember all the sub parts. That little SW-1 is one of my favorite locomotives.