Skip to main content

Closed7 replies

My H16-44 no longer moves.

Putnam DivisionPutnam DivisionOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have a TMCC/RS New York Central H16-44. It was working fine when it no longer would go forward or reverse. RailSounds and other TMCC functions like directional lighting and crew talk respond fine.

I did a reset as specified in the manual. It's engine # is 70.

 

STEP 1: Move the switch on your

locomotive from RUN to PRG.

STEP 2: Plug in your Command Base.

STEP 3: Place the locomotive on track,

then turn on power to your track.

STEP 4: Press ENG then input the

locomotive’s ID# (70). Press SET.

STEP 5: Press ENG, the ID#(70), AUX1, then

press 8 for this particular locomotive.

STEP 6: Turn off power to your track and

wait ten seconds.

STEP 7: Remove the locomotive from your

track, and move the switch from PRG to

RUN.

STEP 8: Place the locomotive back on

track, then turn power on to the track.

STEP 9: Press ENG and the ID#(70), then

operate as normal.

 

……but nothing is changed. It responds to all TMCC commands, except it won't move…..

 

Any thoughts?

 

Thanks in advance.

 

Peter

Original Post

Replies sorted oldest to newest

Marty FitzhenryMarty FitzhenryOGR Forum Member MEMORIALIZED MEMBER

Check what John stated. If that checks out, look at the following.   Check for 5VDC at the Odyssey encoder board.  If you do not have it, take your meter back into the driver board out wires to the Odyssey encoder.  If you do not have 5VDC at that point, check for 5VDC going into the driver board.  Let us know where you are at with that and we can give you a short cut to get 5VDC going into the driver board.

 

If you do have 5VDC at the Odyssey board at the motor, your board might need to be replaced.

 

 

Views: 927
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×