My club has 8 New York Central O scale heavyweight passenger cars by K-Line with silhouettes; probably 1990's production. No boxes so no product numbers. Here's a stock photo of a similar K-Line product:
These have incandescent bulbs which I will replace with LED strip lighting.
How should these cars be opened for LED strip lighting and regulator installation?
Thanks in advance for your help.
Replies sorted oldest to newest
I have the same cars. Take the plastic trim piece off the bottom. Remove the recessed screw in each vestibule. You then should be able to slide the floor out. You will have to unplug the lights from the chassis.
Carl,
While you have the body off the floor, you might consider adding shades in a few windows.
John
Access to this requires an OGR Forum Supporting Membership
