Updated 8/3/2021:
I will paint it tomorrow and maybe install it.
More when I know it. 
George
Updated 8/5/2021:
I did manage to cut the section of fascia to a more accurate shape and paint it yesterday. As I was going to install it today, it occurred to me that I should wire the DZ-2500 pushbuttons into it and create a small section map of the area. After lifting the track plan section from RR-Track, importing it into Visio, and adding a few labels, I printed it. Then it was off to Staples to have it laminated. Like the one for the Staging Area, this will have the DZ-2502 push-buttons installed so as to straddle the tracks they control. Like below:
Here's the painted fascia section lined up to go.
And here's a better view of the "map" that will be mounted on the fascia as soon as I get all the details figured out.
By the way, if you like the PRR station sign, there's a free online tool for making them courtesy of Robert Schoenberg.
http://prr.railfan.net/makesign.html
Hopefully by tomorrow, we'll get the pushbuttons installed and wired and then install the fascia.
More when I know it.
George
Updated 8/7/2021:
Didn't get much building done today as our attention was diverted by the Beaver, PA car show. But I am doing some thinking about the following items:
More when I know it.
George
Updated 8/8/2021:
I am in the process of acquiring a brass yard office / tower for use as the Weirton Steel Yard Tower. The idea of a tower in the yard sort of grew on me. A little research today confirmed the existence of such a yard office. I will also place a sign in the yard advising inbound trains to the Blast Furnaces to report to the office first.
Began the work of installing Switch Bus #2 (Central). That involved:
Photo below shows the Atlas 205 slide switches used by the DZ-2001 Data Wire Driver for the No. 2 Switch Bus. The slide switches have all been labeled correctly. Switches 17, 18, and 19 are furthest away from the board.
Switch #34 has received its power & ground leads from the Switch Bus. When we are finished, the conduit will get its cover. The white 22 gauge wire leads to the switch's pushbutton.
Switch #33 has also received its power and ground bus wires. The triangular piece of masonite helps hold the access hatch cover in place.
More when I know it.
George
What a plan! 👍🏻
@Mark Boyce posted:What a plan! 👍🏻
Thank you, but the alternative is chaos. Been there, done that. 
Not going back, at least not willingly. 
George
I've never built a layout much bigger than my current 11x8. the volume of everything is loud enough that you have to be well documented
@Mark Boyce posted:I've never built a layout much bigger than my current 11x8. the volume of everything is loud enough that you have to be well documented
Mark,
Without a systematic approach, the thought of tracking down a problem in such a large layout absolutely terrifies me. Plus when you work on different things (scenery, wiring, bench work) and switch around among them, you tend to forget how (and why) you took certain approaches. I confess that at times I have to revisit my notes.
George
@G3750 posted:Mark,
Without a systematic approach, the thought of tracking down a problem in such a large layout absolutely terrifies me. Plus when you work on different things (scenery, wiring, bench work) and switch around among them, you tend to forget how (and why) you took certain approaches. I confess that at times I have to revisit my notes.
George
George,
Without a doubt, I am in total agreement with you! I do not believe I would attempt a layout as large and complex as yours even if I had the space and resources to do it. Maybe I am too closely removed from my working days. Your layout project reminds me of designing, building, and testing a power substation control project or telecom central office link. Documentation, documentation, documentation was totally necessary. Too much for work me on a layout. 
On the other hand, I am totally fascinated with what you are building. Must be why I keep commenting! 
Mark,
Now that I have truly retired, I find that anything I do on the layout is motivation for the next step. Sometimes the progress can only be measured in inches, but I am resolved to keep going. I am looking forward to various intermediate milestones - completing particular buildings, finishing an area's scenery, whatever. And of course, I am thinking about the day that I can run a train completely around the layout.
I appreciate that you do keep commenting.
So today from the "Inching Along Department", I managed to run power, ground, and data to Switches 33 & 34. They now respond to my CAB-1. And I have word that the 3 HO Albion Catalog houses are coming tomorrow.
More when I know it.
George
@G3750 posted:Updated 8/5/2021:
I did manage to cut the section of fascia to a more accurate shape and paint it yesterday. As I was going to install it today, it occurred to me that I should wire the DZ-2500 pushbuttons into it and create a small section map of the area. After lifting the track plan section from RR-Track, importing it into Visio, and adding a few labels, I printed it. Then it was off to Staples to have it laminated. Like the one for the Staging Area, this will have the DZ-2502 push-buttons installed so as to straddle the tracks they control. Like below:
And here's a better view of the "map" that will be mounted on the fascia as soon as I get all the details figured out.
By the way, if you like the PRR station sign, there's a free online tool for making them courtesy of Robert Schoenberg.
http://prr.railfan.net/makesign.html
Hopefully by tomorrow, we'll get the pushbuttons installed and wired and then install the fascia.
More when I know it.
George
Hey George, I'm curious here with switch 34 and the straight that leads up to it. Does just the roof overhang and that is what we see, or does it go over the rails on the corner of the building? I would imagine it is just the overhang as it doesn't seem like it would go inside then right back outside the building, but stranger things have happened.
@Dave NYC Hudson PRR K4 posted:Hey George, I'm curious here with switch 34 and the straight that leads up to it. Does just the roof overhang and that is what we see, or does it go over the rails on the corner of the building? I would imagine it is just the overhang as it doesn't seem like it would go inside then right back outside the building, but stranger things have happened.
Dave, you know how truth is always stranger than fiction? And how there's a prototype for almost every situation? Well, here's your proof. 
I'm probably going to do a variation of one of these two corners.
Neither actually are open to the traffic going by. And in my case it will trains not automobiles.
George
Talk about hacking the corner off a building. That is very interesting. I guess the railroad may have been first, or maybe they were both there at the same time. Either way, very interesting indeed. Thanks George.
@Dave NYC Hudson PRR K4 posted:Talk about hacking the corner off a building. That is very interesting. I guess the railroad may have been first, or maybe they were both there at the same time. Either way, very interesting indeed. Thanks George.
Hard to say which came first.
George
Updated 8/12/2021:
I have a lot of things to report today.
First of all, the 3 LaserArt HO Albion Catalog House kits arrived yesterday. Looks like shortly we will be doing some major house construction. For the time being, that is on the back burner.
The new Alco S-2 Western Pacific switcher arrived. It will be getting a new stack and I still need to determine what Weirton Steel road number it will receive. It's stable mate is #208. Here it is on its shake-out run on the Panhandle this afternoon.
Most of yesterday and today have been spent on installing data wires for Switch Bus #2, which governs Switches 3-19 and 33-35. Below is a look at the DZ-2001 data wire bus panel. The white wires coming out of the top of the Atlas 205 slide switches go to "gangs" of 2-4 DZ-2500 switch machines. The setup will help with debugging should one of the DZ-2500's get its mind "scrambled" and keep the rest operating correctly in the meantime.
This photo shows some of the data wires awaiting connection to future switches.
Below is the fascia with the track map on it. The DZ-2502 push buttons have been attached to the map at the switches they control. I still have to put the fascia in place and wire the push buttons.
More when I know it.
George
You definitely were smart putting in wire management for that many. Reminds me of the telephone company 😉
@Mark Boyce posted:You definitely were smart putting in wire management for that many. Reminds me of the telephone company 😉
One ringy-dingy! Two ringy-dingy!
Yeah, I like the DZ-2500s but they are serial devices (ask Gunrunner John about the steps he's taken trying to simplify his life). So if one in the middle of the chain gets "confused", the whole chain can stop working. Then tracking down the culprit is a big game of "swap". Uh, no thanks. This way, I am only having to hunt among 4 switches rather than 15.
George
Yup, I saw John’s discussion. We did the same thing at the phone company with serial systems way back. Even with a few units in a loop, troubleshooting could get mighty confusing. 🤪
Updated 8/14/2021:
The Eastern Approach fascia is partially installed. All 5 push-buttons for the affected switches are installed. Four are operational (one needs the actual switch to be installed – a future step).
The fascia has been partially installed. It is attached at the bottom edge.
This is the prototype in the area of the stone arch. The backwater is in front of it.
In this next photo of the model, the backwater in front of the stone arch can be seen. I will use plastic wood or filler to make sure the plywood bottom is water-tight. Then it will get some paint, scenery, wildlife, vegetation, and ultimately some Woodland Scenics Deep Pour (Murky) water. I will use trees and undergrowth to blend everything together, hopefully representing the prototype. Below in the edgewise view it can be seen that the top of the fascia still needs to be attached.
More when I know it.
George
It's looking great, George! very much like the real place!
Access to this requires an OGR Forum Supporting Membership
