Skip to main content

I've been searching around with no luck on this one.  I'll try to explain as best I can.

I have a Lionel Lionmaster SD90mac that I run in conventional.  I usually keep the Railsounds switch off, but I use a battery anyway. The reason for the battery is that When I blow the horn at very low speed, it doesnt work without the battery. 

But here is where it gets funny:  Keep in mind sound is switched off.  When I stop the train and shut off the power to the track, even switch off the surge protector my transformer is plugged into, The railsounds starts its start-up sequence.  It lasts for about 2-3 seconds then stops.

Any ideas?

Thanks.

Original Post

Replies sorted oldest to newest

Post
×
×
×
×
Link copied to your clipboard.
×
×