I would like to replace the Lionel trucks on some O-27 circa 1950 rolling stock with MTH Bettendorf trucks 30-89001. Looking at the packaging there is no hardware to attach the trucks to the old rolling stock. Any recommendations?
Local hardware store should have small machine screws to fit. I think they're either 1/8" or 3mm. Assuming you're replacing bar or staple end trucks held in with horseshoe clips, you'll also have to drill the mounting holes out a bit.
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
Access to this requires an OGR Forum Supporting Membership
OGR Forum Supporting Membership
Help support this forum with an OGR Forum Supporting Membership. You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM! A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!
OR
Access the ALL the OGR VIDEO FORUMS ANDover 300 back issues of OGR with a DIGITAL SUBSCRIPTION!