Skip to main content

"HONGZ" stands for HO scale, N scale, G scale, and Z scale.

Post your non-O scale stuff here!

4 replies

Seeking Info on Computer Control Systems with DCC interfaces

G3750G3750OGR Forum Member SUPPORTING MEMBER

All,

Can someone point me to one or more computer control systems for HO trains with DCC?  I am specifically interested in:

  • Systems that can take input from sensors and locations
  • Start / stop trains
  • Interface with Arduino programmed processors and accessories

I need some pointing in the right direction.

Thanks,

George

Original Post

Replies sorted oldest to newest

Joe RampollaJoe RampollaOGR Forum Member

Hi George,

   You might want to take a look at this.  Inexpensive DCC control from your laptop with an Arduino and a cheap DCC decoder in the loco, open-source software is free.  (As I understand it, no other DCC hardware is needed.)

http://www.trainboard.com/high...and-interface.84800/

https://www.youtube.com/channe...OMAIH-_g-_rZw/videos

Take care, Joe

 

Last edited by Joe Rampolla
Pat MarinariPat MarinariOGR Forum Member

You might also want to take a look at "Train Controller" from Freiwald Software.  www.freiwald.com

I'm pretty sure this is the software that is used to operate the "Minatur Wonderland " layout in Hamburg Germany.

I am currently using this software to operate my O gauge layout with a program that translates the DCC commands to DCS commands.  The capabilities offered by this software are virtually endless and if I recall, you can download and use a demo copy.

I hope this is helpful.

 

Add Reply

Views: 187
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×