Skip to main content

1 reply

Smoke Unit with problem - F3-UP-A-Not Power

Leandro GarciaLeandro GarciaOGR Forum Member

Hello, at York Trains Show I bought an F3 UP - 6-24552!
The A unit does not power and has a problem with the smoke unit.
I need help to know about voltages and measurements that I can do, because as I live in Brazil it is complicated to send for repair.
What happens:
When I turn on the unit the resistor works and I feel the smell, but the motor doesn't start. So I took the motor and tested it out of the circuit and it is perfect.
So I would like help to know if I have measurements that I can do, because when I start the motor I don't have 5V in the terminals. (electric scheme).

Thank you very much for your help.

Last edited by Leandro Garcia
Original Post

Add Reply

Views: 172
Post
This forum is sponsored by Lionel, LLC

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×