TMCC with a DCS remote ?

You don't need to know the engine's TMCC ID#. Just enter it as any old ID# and use the DCS Remote to change it to whatever you want it to be:

Menu/System/Engine Setup/Edit Engine/Edit Engine Address, select the TMCC Engine and follow the prompts.

You may have to first ensure that the engine is in the Active Engine List by pressing ENG, scrolling to the engine and pressing the thumbwheel.

This and a whole lot more is all in MTH’s “The DCS O Gauge Companion 2nd Edition", available for purchase as an eBook or a printed book at MTH's web store!

Thank You Barry

Ill try it and report my findings.

You do have to set the PGM/RUN switch to PGM in order for the DCS remote to be able to change the address.

You need to add  a TMCC engine to the dcs remote giving it a name and hitting the "D" for done. Now a list of TMCC IDs shows up, If you know what it is use it. If you don't know make one up. Now you have a TMCC  engine added to the dcs remote (you'll find it in the inactive list)  to work with  that you can edit the address . Follow the on screen instructions.... Place run / program switch to program  etc... If you're successful you should hear a  whistle blast indicating the new TMCC ID took.

Thank You Barry !

Everything worked fine after the explanation.

Thanks to John and Gregg also !

Gentlemen,

   Remember to switch the engine switch back to run once you program it into the DCS.

Guns is absolutely correct, in the use of the engine programming switch, looks like Bob Taylor did every thing correctly!

PCRR/Dave