I have a K-Line scale Hudson #5343 and a Weaver Blue Goose #3460. Both are 4-6-4's. The Hudson has 2 traction tires, the Blue Goose has 4. I need to replace them. I measured the diameter of the wheels and it is 1 5/8" or approximately 41mm. If you have a K-Line scale Hudson does 1 5/8" seem right as far as the diameter? I looked at MTH's traction tire chart (see below) and it is recommending DE0000031 (30.3mm) as the correct traction tire. This is my first time replacing them, does that seem correct?
Premier O Gauge Locomotive Traction Tire Chart (Continued)
Part Number Traction Tire O.D. Tire Width Wheel Diameter
DE0000031 30.3mm 3.5mm 38.5mm TO 42mm
BLUE COMET 4-6-2
ROYAL HUDSON 4-6-4
NORTHERN 4-8-4 PS-4 4-6-2
PRR T-1 4-4-4-4 GS-4 4-8-4
PRR ATLANTIC 4-6-2
NIAGARA 4-8-4
FEF NORTHERN 4-8-4
GREENBRIER 4-8-4
PRR S-1 6-4-4-6 T-1 4-8-4
J-1e HUDSON 4-6-4
ESE AMERICAN 4-4-0 (80" DRIVERS)
J-1d HUDSON 4-6-4 G-5 4-6-0
ESE HUDSON 4-6-4 P-5a MODIFIED
DREYFUS HUDSON 4-6-4 K-4s 4-6-2
HIAWATHA 4-6-4
CHAPELON 2-3-1 PACIFIC 4-6-2
E-4 HUDSON 4-6-4 S3/6 4-6-2
P-5a ELECTRIC
