Can I run my 8 loops of original O gauge track on Legacy? I can't isolate the whole outside rail like Gargrave or Fasttrack.
Original Post
Replies sorted oldest to newest
You can have as many loops as you want with Legacy, and there is absolutely no need to isolate the outside rail. Just connect a wire from the Legacy base to either outside rail of each independent loop. Or, even more simple, just run one wire from the base to the common on a terminal strip from which you run hot and common to provide track power to each independent loop.
@Gdawg posted:Can I run my 8 loops of original O gauge track on Legacy? I can't isolate the whole outside rail like Gargrave or Fasttrack.
FYI The outside rails of fastrack are tied together and , see Keiths post above
TMCC/Legacy won't know or care that you're running on tubular track. For that matter, neither will MTH DCS if you decide to run some of those.
Thanks for replies. I've never had Fasttrack so I didn't know. Also, I'm just about to hook up my Legacy. Thanks everybody.
after 35 years returning and things have changed but many have not!
