Purchased from trainz. Opened it to see someone cut off... The end. Wanted to use lock on with it. Now I have to buy an adapter? Really I only need male end.
Anyone have a male end or now where to get one cheap?
Original Post
Replies sorted oldest to newest
Receptacle:
https://www.mouser.com/Product...jHRWlfuEkKUCBQ%3D%3D
Plug:
https://www.mouser.com/Product...jHQu8BY4xNrSRg%3D%3D
Pins:
https://www.mouser.com/Product...XyNQ5%2Fp50i5g%3D%3D
Sockets:
https://www.mouser.com/Product...kUpH2xgojJNbXA%3D%3D
@gunrunnerjohn can you double check me here
Getting a 403 on their website right now. I'll have to check later. Thank you for the info
If you send me your information I would be happy to send you one. I have a few spare here in my parts drawer.
@rplst8 posted:@gunrunnerjohn can you double check me here
They're fine, you only really need these two just to fix one PH180.
Shell: https://www.mouser.com/Product...jHRWlfuEkKUCBQ%3D%3D
Contacts: https://www.mouser.com/Product...kUpH2xgojJNbXA%3D%3D
To avoid future headaches make sure that you have it phased correctly when you insert the pins into the connector shell. Which wire/pin goes into which hole in the connector shell is important.
It would help to have a PH180 with its connector still intact to use as an example in order to get this correct.
Mike
@Dennis S posted:If you send me your information I would be happy to send you one. I have a few spare here in my parts drawer.
LONG overdue thank you!!!
Everything worked perfectly. I guess I discovered that switch tracks like ac better than DC or my old little DC just didn't have enough current to make my switch lights work....
2 days later water in my basement... Sigh. Had to take everything apart.
