Skip to main content

20160507_001311-1_resized

I was playing around with my cell.

I put some 1/50 scale early WW2 era 2 1/2 ton trucks into the back corner for minor forced perspective.

Can't wait to see this scene with the  cornfield in place, even though you won't then be able to see those trucks from this angle...

Fixed a turnout where the point rails were popping out where it meets the rest of the turnout. There are brass connectors there and they'd loosened up. With a little work with some needle nose pliers, and a little prayer I didn't break something, I think I got that fixed.

If I had to do it over, I wouldn't use micro engineering track. The stuff looks great but it's so fragile and finicky...

Attachments

Images (1)
  • 20160507_001311-1_resized

Here's a Corgi Monkeemobile I restored this weekend. The car, new tires and new stickers were all sourced on eBay. Krylon White primer and Cherry Red gloss paint. Engine resprayed with Rustoleum American Accents metallic silver.

To be done: minor touchups, coat of gloss to protect the paint and stickers, source a Micky figure (who, I assume, is inside the Clarksville station at the moment waiting for the Last Train...)

Monkeemobile-before-after

Now to finish wiring the Clarksville station, glaze the windows and get it on the layout!  ;-)

Attachments

Images (1)
  • Monkeemobile-before-after

DONE! Hallelujah. Tom and I had struggled with trying to assemble this the other night for an hour and a half, and finally gave up. I'd even set all the pieces in a big box and taken up and placed it in my storage area- as I did not want to see it!

Today with both of my kids (ds 19, dd 21) here for Mother's Day, I purposely decided to step out of the mix and let Tom work with them on it. Still not good. Then, finally my son (who really should perhaps get a college degree in Mechanical Engineering, not Physics as he wants) sorted the directions out properly and with me holding pieces, got it assembled.

Track ordered for the center of this, need to get a switch for leading it off the mainline loop.

IMG_1547

 

 

Attachments

Images (1)
  • IMG_1547

Cary.. The station looks great. I understand the instruction thing. We all been there.

Lee, the layout looks great. Like the idea of the forced perspective idea. It looks good.

For me I have been doing Kadee installs on my Lionel NP GP9s and MTH(3040)/ Lionel(2519) GN GP35s. I had used the GP9 kadee mounts that Mario sells on Shapeways. This was a rather straight forward install. For the GP35 on the other hand required modification to Mario's GP9 mounts and not so minor surgery on the trucks of the lionel GP35. Same for the GP30 mounts I used for the MTH GP35. Not so minor surgery on the mounts, but minor surgery on the trucks.  The mounts are already shimmed for the right height and will work with the MTH pilots with out any additional shimming.  Next are my CBQ GP30s

1-DSCF43241-DSCF43251-DSCF43261-DSCF43281-DSCF43291-DSCF4333

1-DSCF43131-DSCF43141-DSCF43171-DSCF43181-DSCF43191-DSCF4320

1-DSCF43001-DSCF4301

 

Attachments

Images (14)
  • 1-DSCF4324
  • 1-DSCF4325
  • 1-DSCF4326
  • 1-DSCF4328
  • 1-DSCF4329
  • 1-DSCF4333
  • 1-DSCF4313
  • 1-DSCF4314
  • 1-DSCF4317
  • 1-DSCF4318
  • 1-DSCF4319
  • 1-DSCF4320
  • 1-DSCF4300
  • 1-DSCF4301

P51 your layout is just looking great! I bet you had fun on ops night!, Mitchell the car looks like brand new, must of taken some time to get that engine out and replace the tires. Not to mention repainting the car. But then again it seams everything you redo turns out looking wonderful.

Suzukovich the Kadee couplers look great, not to many 3 rail people do Kadee's, IMO I think they look a lot better. I change everything I get to Kadee couplers, it takes some time but I feel it's well worth it.

mike g. posted:

Mitchell the car looks like brand new, must of taken some time to get that engine out and replace the tires. Not to mention repainting the car. But then again it seams everything you redo turns out looking wonderful.

Thankee!  Believe it or not, the stickers arrived on Wednesday, and the tires and car on Friday.  This was all done over Friday night and Saturday.   The process was actually fairly simple: 

1) I drilled out the rivets and dismantled the car Friday night, then sprayed the body and chassis with paint stripper and let it sit for a couple hours before rinsing and scrubbing with dish soap to remove residue.  

2) Saturday morning, I sprayed the body, seats and dash with white primer and allowed to dry for a few hours; in the meantime, I sprayed the engine with silver. 

3) Saturday night, I masked off the roof and drag chute and sprayed the body and chassis red. 

4) Sunday morning, I baked the enamel on the body and chassis in an old toaster oven at 250° for an hour, then let cool for an hour while I cleaned off the windshield and put the tires on the wheels. 

5) Then I assembled the car, admired its magnificence for a few minutes, dashed off a happy snap and put together the before-and-after pic, doing a bit of research online for an appropos font to use.

GEDC2394

Right now, the car is back on its painting stand (made from an old box from the Train Tender and some 1/4" stripwood stuck through the cardboard) for touchups and gloss clearcoat... 

After I drilled the rivets out, I drilled 1/16" holes in the bosses; eventually, the car will be put back together with small brass screws. 

Mitch

Attachments

Images (1)
  • GEDC2394
p51 posted:
suzukovich posted:

Lee, the layout looks great. Like the idea of the forced perspective idea. It looks good. 

Thanks! I loved the work you did on your GN and NP units, especially as I live very close to the mainlines of each RR (now BNSF everywhere, of course)...

Lee and Mike thanks. The GP35s were some work but well worth it. I am finally starting  convert my engines to Kadees which had been a long stalled project. Interesting thing about the Lionel GP35, road number is incorrect. It would be correct if it were a BN patch job. (BN2519 was GN3036) but road number on the side should be white number with small font BN underneath and no herald under the window of the cab. Or it a printing error and should be 3019. Not sure how I going to fix it.

Just got done putting the frame work for table 5. It's 2' X 5'. It will be going through the opening I cut ion the wall. before I can put it in place I have to take down some old shelving on the other side of the wall. Breaking to go to a TCA lunch get together this afternoon. When I get back I'll cut the wood for table 6 getting that out of the way. Pic of the frame. It will go through that hole in the wall...............PaulDSCN2403

Attachments

Images (1)
  • DSCN2403

yesterday: my orange/blue 342E R-T-R set arrived. Put together the Realtrax circle, set up the 318E engine with two of my Blue&Silver 300 series cars, and fired it up. What fun. This set has a hand held remote- have never had that before. Easy operation! This track and electric engine will be used on the Wedding Cake Table diorama on Sunday.

Tom is swapping out the USATrack for the MTH Realtrax that came with the 342E R-T-R set on the Wedding Cake train diorama board. Having the roadbed will look better for that purpose. I don't want to use it on the "real" layout. The USATrack 42 8-piece circle will go on the layout, possibly morphing into a small loop (straights are on the way). It will be up on Tom-built piers with a center display platform.

IMG_1569

 

 

Attachments

Images (1)
  • IMG_1569

This evening, we wired up the MTH/Lionel Realtrax 42 circle after having screwed the track down to the diorama board, just to make sure the 318E would be operational on it. Fires up fine and dandy

I tried my hand at repainting the skintone on a few vintage Barclay figures, using recommended to me Testor "Cream"  enamel paint. A better color than Delta Ceramacoat "Fleshtone" acrylic paint.

mike g. posted:

Looking good lee, don't forget the scare crow!

I haven't seen a good scale scarecrow yet, but yeah, I want one for this field. I'll make my own if I have to.

As for the Twilight Zones reference, it didn't occur to me even though I'm a big fan of that show.

Frankly, I wanted to plant a large tobacco crop as that's the most common plant in the area I model, but nobody makes a useable set of plants in that scale and hand making my own would take a literal forever. So, I went with these. There are almost 400 plants in that field, and though it's small, I 'planted' them close together to get the right look for a cornfield.  Besides, it's 1943 on my layout, so a small crop like that wouldn't be unusual at all.

The Art Deco style layout table: Last night was analysis.

1) Looking into what would be best for this table's design aesthetic and layout "style" to raise a circle or loop of track above the mainline.

2) Tossing about ideas of "extending" the ends, and possibly raising the height of the viaduct, and how best to do all of this.

I'm very fortunate in that Tom can build me anything,  just a matter of what.

p51 posted:
p51 posted:

Big updates coming soon.

I didn't get to the backdrops, and a lift-out section of scenery in the back corner didn't get done, but I'm very close to having all the initial scenery done now. Next, comes the backdrops, then trees/bushes and scenery details, as well as completing the ballast (which I did most of the sidings already).

 

 

And, a panoramic of most of what I have done:

really nice. good work there.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×