Skip to main content

Yesterday I went as far as I could to color scenery. Then I looked at the second tunnel opening and decided that had to go tooo like the other end tunnel did. I ripped it out along with the plaster screening around it. I then used up the last of the pink board there. I made it look better and  now it will look like a rock cut in that area of the grade. Rest of finishing the scenery is on hold till my order comes in from Scenic Express. Yesterday I had an idea, decided to go with it. I had stained the fascia board and had too many color variations. Went to Home Depot and got a quart of Black paint to go over the stain. I did that this morning and it was a good choice. The black brings out the lower level of the layout. Later today I will finish off the pink board so it will be ready for plaster wrap. So far this year I have done more then I havbe in the last four or five years.................Paul

Well, summer is about over and all of the outdoor fun and projects.  Golf, yard work, fishing etc.  So now it is back to my layout in process.  Hopefully, in the near future I will be doing some wiring under the layout deck so I went out this morning and purchased a low slung creeper with a raised head rest at Harbor Freight on sale.  I took it for a ride under the layout and it maneuvered great.  However at my age getting on and off of it is the problem.

 

Jim

003

Attachments

Images (1)
  • 003
Originally Posted by Passenger Train Collector:

Film crew here from TM Video Productions. Fascinating to watch and ne part of the process.

Brian

I look forward to seeing your layout on video.  Your layout is very impressive!  TM videos called me 2 weeks ago asking me if they could come out the beginning of November to video my Christmas Train Layout.  Unlike your layout, my layout is not a permanent layout.  I told them I would have it set-it up in time.  Normally, I don’t begin set-up until November.  Thankfully, my wife is very accommodating because my layout takes up most of our entire living room and most of our furniture is moved out.

   

Two weeks ago I started to set-up my layout by setting up our Christmas Tree!  Two sets of my lights were no good…so it felt very strange going into Menard's to buy Christmas lights at 8 o’clock at night in the 2nd weekend of October!   Thankful some retailers have their Christmas stuff out early!  One of my animated village houses blew out this past weekend.  So, I was on the phone this past weekend ordering a replacement and asking for quick shipment! Again, it felt weird making that phone call especially to have my order rushed. Like most years with the setup of my layout, problems keep arising which requires extra time to figure them out and keeps me up late at night…up to 2 am last night and at work by 7:30 am this morning!  My layout is always different from year to year which causes some of my problems.  However, I enjoy changing it from year to year by trying to make it “better” than the previous years.  This year I replaced my track with Fastrack and added many new village pieces.  However, my set-up is on schedule and setting up the village should be completed by the end of this weekend.  That will give me time to focus on some of the smaller details on the layout and making sure all the trains run smoothly (hopefully) for video. 

Ken

Yesterday I spent the morning on using the last of the plaster wrap to cover a second tunnel portal I decided to do over with pink board. In the afternoon Mr. Brown dropped off my scenic materials to finish. So last night I burned the midnight oil till midnight applying the plaster wrap to the remaining area of old scenery. Today will be spent covering it all with plaster. But while doing that I'll run a train or two.....Paul

I received 5 more switches all manual in kind rough shape but they work. so here is the plan for the yard I'm expanding out into the hallway a little the hall is 48 inchs wide and I will be taking about 23 of that for a yard. so the yard will be 4 legs 23" wide by 162" long. only issue I see with it is it will be a duck under to get along the right side of the layout. here's a pic of the layout plan it's in the pink like color

loft8b

Attachments

Images (1)
  • loft8b
Files (1)
Last edited by Jhainer

Got quite a bit done on the bridge framework yesterday and hope to finish it this afternoon.  (If I get off the forum and get busy that is.)  My son-in-law was over for dinner last night and helped with the paint colors to paint the foam.  I knew I should have called him first, but didn't want to bother him.

 

Art 

Originally Posted by Chugman:

Got quite a bit done on the bridge framework yesterday and hope to finish it this afternoon.  (If I get off the forum and get busy that is.)  My son-in-law was over for dinner last night and helped with the paint colors to paint the foam.  I knew I should have called him first, but didn't want to bother him.

 

Art 

Let me help motivate you Art. I'll see you next Sunday! 

After Raking leaves this morning, took a break and went to Wild Bill's Trains.

Purchased a Lionel Locomotive, which I will feature in my next YT video. Had a Lionel Engine serviced as I waited and watched a TV show about model trains on a satellite channel. I have cable so I do not get this program. Also picked up the 2015 Volume One RailKing & Premier O-Gauge Trains. Below is a photo of Wild Bill's Trains. 

  Click photo to enlarge.

Wild Bill's Trains

Attachments

Images (1)
  • Wild Bill's Trains
Originally Posted by trainroomgary:
Originally Posted by Mark Boyce:

Gary,

Wild Bill's sounds like a great place!

Hi Mark

     They also have a large show room and an operating layout. The layout is all 3 Rail,

10' x 28'. If you are ever in South Eastern Michigan, it is a must stop for 3-Railers & American Flyer Trains.

Sounds even better!  I agree it sounds like a must see.  I have never been to Michigan, but if I do I will look for Wild Bill.

Thanks, guys.  And yes, Jon, that is the bridge that I am trying to pattern mine after.

 

Mark - I am using 1/4" thick flexible foam that is used for insulation under metal siding.  It can be worked just like any Styrofoam, but is thin and will flex or bend to the contours of my framework.

 

It has been a little frustrating at times getting to this point, but I hope that I am finally on the right track. 

 

Art

Originally Posted by Chugman:

Thanks, guys.  And yes, Jon, that is the bridge that I am trying to pattern mine after.

 

Mark - I am using 1/4" thick flexible foam that is used for insulation under metal siding.  It can be worked just like any Styrofoam, but is thin and will flex or bend to the contours of my framework.

 

It has been a little frustrating at times getting to this point, but I hope that I am finally on the right track. 

 

Art

Art,

Thanks for the scoop!!  It sure looks like you are on the right track.  The frustrations will be forgotten when you look at the final product, and knowing you conquered the frustrations will make it just that much more satisfying!

Originally Posted by CBS072:

Saturday, I changed the bottom front headlights on my Williams FP45 from white to red.  Wired the red lights to the rear lights so when the engine change directions the front top headlight goes out and the bottom headlight turns red.

We had a great meeting of the Sugar Creek MRR Club at Keith's on Friday night; here's some pics of my MTH Electroliner getting some exercise on his layout!

 

 

 

GEDC1079

GEDC1080

GEDC1081

GEDC1082

Mitch

Attachments

Images (4)
  • GEDC1079
  • GEDC1080
  • GEDC1081
  • GEDC1082

The layout is up. Having modules helps. But I really hate the setup and teardown phases. Efficient packing/storage requires a different order than teardown/setup. I have too much stuff in the room and no other place to really put it.  2#s of bologna in a 1# sack!

3 loops are now operational and tested for both TMCC and DCS.

 

I'm now working on the non-modular phase, which is primarily the cityscape. This sits on top of a set of unused modules. I made several sets of 3D city backgrounds. I'm pleased with the effect.

This is the stuff no one sees, but is necessary to make things look good: Building and sign wiring. Since it all gets torn down later and then set back up, I'm adding quick connect plugs to make my life easier. Takes time, but worth it.

 

Chris

LVHR

Originally Posted by M. Mitchell Marmel:
Originally Posted by CBS072:

Saturday, I changed the bottom front headlights on my Williams FP45 from white to red.  Wired the red lights to the rear lights so when the engine change directions the front top headlight goes out and the bottom headlight turns red.

We had a great meeting of the Sugar Creek MRR Club at Keith's on Friday night; here's some pics of my MTH Electroliner getting some exercise on his layout!

 

 

 

GEDC1079

GEDC1080

GEDC1081

GEDC1082

Mitch

Mitch,

It is funny how one's tastes change with the passage of time.  Years ago I did not like the Electroliner.  Now I think it is pretty cool looking!  Great train and it looks like Keith has a nice layout.  Also, it is great to see young and old enjoying trains!!

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
CONTACT US
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×