Does anyone know if you have to do anything special for wiring a Peco On30 turntable for DCC? This link suggests you don't have to do anything special:
http://www.modelrailforum.com/....php?showtopic=22244
But I guess I'll have to run feeders to the underside and see what happens? I stink at wiring and will have my turntable approach tracks done hopefully very soon and I'd like to finally start running trains...
Replies sorted oldest to newest
Some type of polarity reversing device for the turntable tracks? I don't know much about 2 rail DC or DCC, but I thought polarity could be a problem with a turntable?
I have one, I am yet to install it, but it should be standard like reverse loop or wye, you will need a auto reverse decoder, otherwise its normal wiring, contact me if you need the decoder for this. ncng
Well, I wired the thing up like the instructions say and it worked just fine with DCC. Just make sure you have the split ring sections allign to your primary positions for the bridge, the gap should be probably halfway through the normal rotation. The sound system gap is quick, only a second of no sound from the sound system. I'm perfectly fine with that.
Access to this requires an OGR Forum Supporting Membership
