I have 6 places on my layout where a DZ-1008 relay controls the power to a single track section based on tack switch position. Five work fine. One intermittently drops out, and I can hear it drop out. When it does, if I push the button on the DZ-1002 controller and hold it (for the direction the switch is already thrown), the relay will change to the normally open contact and route the power correctly. FYI, it's a DZ-1000 switch machine.
Any ideas what is going on here?
Replies sorted oldest to newest
Email Dennis Zander, from Z Stuff, he will be happy to help. He will also send you a new one for free if it defective.
www.z-stuff.net. Phone 585-377-0925.
I did email Dennis several days ago, but unfortunately, no response, so that is why I posted here. I have not tried calling yet.
He may be on vacation. I would email him again. Have you check the ground and or wiring/ connections, etc
@Ken Wing posted:I did email Dennis several days ago, but unfortunately, no response, so that is why I posted here. I have not tried calling yet.
I find calling to be a better plan.
Access to this requires an OGR Forum Supporting Membership
