Added One PS3 engine and lost two PS2 engines | O Gauge Railroading On Line Forum

BillyOGR Forum Member DIGITAL SUBSCRIBER

I added one ps3 engine and lost two ps2 engines, when I added my ps3 diesel which Took a few times last night, today I go to start ps3 engine and one of my ps2 engines started up at the same time under the same address number#1 as my ps3 did, so I shut down engine and both shut down same time ok?? Some thing is up here, so I try again to start my ps3 engine and then a different ps2 engine starts up with the ps3 engine again so I shut engine down again and try to see if I can start my two ps2 engines up in there address numbers and with no luck with starting up the ps2 engines, remote says engine not on track or check track
Any help would be great thanks...

9/3/148:04 PM

Original Post

Replies sorted oldest to newest

suzukovichOGR Forum Member

Try deleting all three and then add them back in one at a time with the other engines not on the track. That should correct the conflicting issues.

9/3/148:16 PM

gunrunnerjohnOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

You could always reset the remote and start from scratch. I've been known to do that when it gets too frustrating.

9/3/148:27 PM

BillyOGR Forum Member DIGITAL SUBSCRIBER

Will try later and see how it go's

9/3/149:19 PM

Add Reply

Sign In To Reply

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>