Skip to main content

2 replies

Hand held is not recognized

MJ Motorman JimOGR Forum Member

I am new to the Forum and need some help.  I have set up the TIU and tried to load a MTH diesel into the hand held device. I keep getting a message saying that there no locomotive present. After several tries, I place another locomotive, in place of the first, and received the same message saying that there was nothing to load. I have set up the TIU to be able to use Fixed 1 port. I also tried using Fixed 2, but even though juice is going in, there is no juice going to the track. What am I doing wrong? Please help, thank you, Jim

Original Post

Replies sorted oldest to newest

G GreggOGR Forum Member

Maybe this will help....   first part.... the remote must communicate with the tiu else nothing works period...Hit the  "read" bottom left on the remote and we should get the Message TIU found with no aiu box connected or something very similar, The important part is tiu found. Give it a try,

Second part    The tiu need a power supply to turn on (function operate). Power to fixed 1 or an aux power or both works .  I noticed you tried fixed 2 but fixed 2 is a straight through connection which will allow voltage through  but unless the tiu is turned on there will be no  dcs signal so thinks don't work.

The red out put from the tiu channel must go to the center rail.... try it again....good luck.

 

Add Reply

Views: 214
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×

Access to this requires an OGR Forum Supporting Membership

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!


    OR     


Access the ALL the OGR VIDEO FORUMS AND  over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!



$12.00 per 12 Months (plus tax if applicable)
×