Skip to main content

Hi,

Hooked up the base 3 last night, with the big boy super set.  Took a while but finally got the Big Boy to connect up and run.  Still working through al the features, not very user friendly.  Anyhow, trying to get the stock car to make the aux sounds, talking etc.  I got it assigned to the base 3, it will make noise, sheep sounds while rolling, but none of the buttons do anything on the app.  I can't get it to talk, like it shows on Eric's trains video, "eat you with some mint jelly" unload these sheep" etc.  Looking for what I am doing wrong, can't figure it out.  Thanks

Original Post

Replies sorted oldest to newest

Another issue I'm having, is connecting a legacy BNSF 1228 genset.  It will connect to the base 3, lights kick on and whistle sounds, but thats it.  It won't move, nor does the engine info populate on the screen.  And after about 30 seconds, it no longer shows on the engine roster.  The big boy legacy works, but thats the only one I can get to connect and work right.

Does it have a unique TMCC address (using the PGM / RUN) procedure and are you setting that address as a Legacy Control, Legacy Sounds and set it as a freight car in the configuration menu? 

The engine issue we will need a product number.  Depending on it's age you may have to enter that information manually and again did you set it for it's unique ID (using the PGM / RUN) procedure and as a Legacy control, diesel, Legacy sounds?  I know these are basic questions but without know what you did we have to ask.

Add Reply

Post
This forum is sponsored by Lionel, LLC
×
×
×
×
Link copied to your clipboard.
×
×