Skip to main content

Hello,

 

I am in the process of rebuilding / restoring several Lionel ZW transformers and I have several questions:

 

1. I need to replace the Bus Bar on one of the transformers (ZW-27). I buy everything from Jeff at The Train Tender but it does not appear that he stocks this item. Does anyone know where I might find one?

 

2. I also need to replace several bulbs. I was wondering if anyone has used these LED bulbs and what their thoughts are.

 

LED Lights

 

At $4 a piece they seem a little expensive but wondering if anyone thought they were worth it or not.

 

3. I have cleaned the case with a mild cleaner so the dirt and grime are all off but want to know if there is something I could use to polish them to make them look even better

 

As always thanks for your help!

 

Dave

Original Post

Replies sorted oldest to newest

I have polished transformer cases with Butchers wax.

 

I have serviced a fair number of ZW transformers, and rarely have encountered a burnt out pilot lamp. Just be certain to use the correct one. Most ZW transformers use a #51 six volt bulb. The later models use a #1445 18 volt bulb.
I have been told that many imported bulbs will not fit the transformer because the base is longer. I have old stock USA bulbs that I use. Don't know about the LED replacements.

 

It's a bit surprising to me that you need a bus bar. Typically they can be re-used, even if all the terminals have broken away.

 

 

 

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×