My Layout Power Control Scheme

John, getting ready to wire 21 Ross Ready switches (non-derail).   I have 2 power sources, one AC and one DC.  The Lionel is an AC 1.8 amp variable transformer, PN 6-32923.  The other is a Wanptek DC switching power supply, model KPS305D.  It has 0-30 V,  0-5 A.  Which is the preferred power source to use and how does the power source connect to all 21 switches ?  What volt and amp settings are best ?

Mike Miller

What switch machines are you using?

Sorry about that - DZ1000 / dz1002

Well, Z-Stuff recommends 9-14 VAC for the DZ-1000, don't know why you wouldn't go with their recommendations.

Thanks John,  so the Lionel 1.8 amp, 18volt variable transformer should do the job, correct ?

Mike

Yep, I'd plan on using more like 14 volts, but 1.8 amps should be enough for all your switches with power to spare.

My Menards fire station, with the trucks moving back and forth, is one of my noisier accessories. I also found it useful to employ the remote controlled A/C switch, as described above, to conveniently turn it on and off.