Skip to main content

Early this week, my wife Judy and I went to visit her family in northern Indiana. While there, I went to the Amtrak station in Waterloo. I did not see any Amtrak trains, but saw several Norfolk Southern freight trains and a lot more!

 

When I arrived the first day in mid morning, there was a NS maintenance man working on a switch machine. I had seen and photographed the machines before, but not like this – he had removed the covers from the machine and its inner works were exposed. I even saw it operate with the cover off! I asked him if I could take a few pictures, and he said that it would be OK. Here are some:

 

Switch Machine 01 med crp DSC04999

 

Switch Machine 02 med crp DSC05000

 

Switch Machine 03 med crp DSC05001

 

Switch Machine 04 med crp DSC05002

 

Switch Machine 05 med crp DSC05003

 

After I took the pictures, and within a span of less than 30 minutes, I saw four manifest trains – two west bound and two east bound. I took several pictures of the first three, all of which were headed by three NS diesel engines with the familiar black finish. So I put my camera away and decided to just watch the fourth train. (I can’t really appreciate the trains when I am taking pictures.)

 

Of course, that fourth train was different. The lead engine was a NS, but the second and third engines were BNSF! Oh well . . .

 

 

NS in Waterloo 01 med crp DSC05004

 

NS in Waterloo 02 med crp DSC05005

 

NS in Waterloo 03 med crp DSC05007

 

NS in Waterloo 04 med crp DSC05012

 

NS in Waterloo 05 med crp DSC05013

 

When I arrived the second day there was a man wearing a yellow vest standing by the tracks on the opposite side where I had parked. He looked at me sort of puzzled, so I told him that I was a railfan I just wanted to watch the trains. He crossed the tracks and came over to talk.

 

About that time I saw, in the far distance, the headlight of an east bound train. We continued to talk and he asked me if I was familiar with the steam engine that runs out of Fort Wayne. I told him that I was, the Nickel Plate Road Berkshire 765 that is run by the Fort Wayne Railroad Historical Society. He then told me that he operates that engine!

 

Right after he said that he said that he had to catch the train that was coming and which  by now was not that far away. So he crossed the tracks and waited. The freight trains came to a stop after a very long decelerating approach, and the man climbed aboard and into the engine through its front door.

 

I took several pictures of the aforementioned, and did not remember that my small point-n-shoot camera had video capability until the man was inside the cab. So I took a short video from that point.

 

 

NS in Waterloo 06 med crp DSC05031

 

NS in Waterloo 07 med crp DSC05032

 

NS in Waterloo 08 med crp DSC05033

 

NS in Waterloo 09 med crp DSC05034

 

NS in Waterloo 10 med crp DSC05035

 

 

 

Perhaps all of the above is old hat to many of you guys, but I really got a kick out of it and thought it would be nice to share.

 

Alex

Attachments

Images (15)
  • Switch Machine 01 med crp DSC04999
  • Switch Machine 02 med crp DSC05000
  • Switch Machine 03 med crp DSC05001
  • Switch Machine 04 med crp DSC05002
  • Switch Machine 05 med crp DSC05003
  • NS in Waterloo 01 med crp DSC05004
  • NS in Waterloo 02 med crp DSC05005
  • NS in Waterloo 03 med crp DSC05007
  • NS in Waterloo 04 med crp DSC05012
  • NS in Waterloo 05 med crp DSC05013
  • NS in Waterloo 06 med crp DSC05031
  • NS in Waterloo 07 med crp DSC05032
  • NS in Waterloo 08 med crp DSC05033
  • NS in Waterloo 09 med crp DSC05034
  • NS in Waterloo 10 med crp DSC05035
Videos (1)
MOV05037
Original Post

Replies sorted oldest to newest

Skip,

 

This train had stopped some 50 yards from the grade crossing to pick up the passenger, and the crossing gates did not actuate. However, as soon as the engine started (and blew its horn) the gates came down. Evidently, the engineer was able to control the crossing gates.

 

Funny thing was that when I remembered that I could take videos with my small camera, albeit not great videos, and started the video, the engine blew the horn at that precise moment; I was right next to it, and it was almost deafening!

 

I made a point to notice when the gates operated on a normal through train, and when the next east bound train came through, the gates operated at least a quarter mile (my guess) before the engine reached the crossing.

 

Alex

Originally Posted by Ingeniero No1:

Skip,

 

This train had stopped some 50 yards from the grade crossing to pick up the passenger, and the crossing gates did not actuate. However, as soon as the engine started (and blew its horn) the gates came down. Evidently, the engineer was able to control the crossing gates.

 

Nope, the Engineer is NOT able to control the crossing protection. Modern day crossing systems are speed sensitive. Plus, there would be WAY too many lawsuits if the crossing protection devices needed to activated buy the poor human Engineer.

GREAT STORY ALEX. IT SOUNDS FUNNY BUT I BET YOU GOT A GREAT THRILL OUT OF THIS EXPERIENCE.

 

ONE TIME WHEN TRAIN WATCHING - I HAD A NS ENGINEER, WHO I DO NOT KNOW,  STOP A LOCAL FREIGHT RIGHT IN FRONT OF ME AND TOSS ME A BOTTLE OF WATER ON A HOT SUMMER DAY. I SAVED THE BOTTLE AS A REMEMBERANCE OF THAT DAY.

 

FREIGHTRAIN

Hot Water,

 

What you wrote makes perfect sense and correlates with what I saw - the train came to a stop after a very long approach where it seemed to be crawling at snail's pace for ever. Then, when it started back up, it accelerated at a much faster rate. I don't know at what point the gates came down as that was when I was messing with the camera to take the video, but they came down very soon after the trains started moving.

 

Freightrain,

Yes, I did. I don't get to see trains up close very often at all, and this sparticular instance is one to remember.

 

Thx!

 

Alex

Post
×
×
×
×
Link copied to your clipboard.
×
×