Today(12/21) I posted a message in the thread PASSENGER TRAINS-Let's See Them. The pictures are grouped by track - 1, 2, and 3, then numbered. Reference Track 3. What should be the second picture is a small green square. If I click on that square, the proper photo(Lionel REA car with interior milk tanks) will appear. Moving the cursor causes the picture to disappear and the small square reappears.
John Mateyko in Lansing, ILL
Replies sorted oldest to newest
You used a left bracket by mistake instead of a open(left) parenthesis. I went into the source code and fixed it - here is the corrected image string in quotes:
@rattler21 posted:
Track 1 MTH Texas
GGD Santa Fe baggage car
K-Line Santa Fe baggage car with dust from roadbed in the southwest. Messenger service
GGD PULLMAN pool 12-1 EAST CONCORD
Lionel Santa Fe dining car with sounds. Fred Harvey staff.
GGD PULLMAN pool 8-1-2 ROCK GORGE
Williams observation repainted to LAKE LOUISE
Track 2: Williams SF 4-6-4 weathered.
K-Line Santa Fe baggage car 1821
MTH Santa Fe baggage car 1812
K-Line 8-1-2 repainted to JONATHAN
K-Line dining car with window treatments and kitchen details.
K-Line Cafe Observation car.
Track 3: MTH Northern
Lionel REA express reefer(interior milk tanks).
Weaver reefer repainted to an REA car leased from the Santa Fe
Williams REA baggage car. This is from the first set of five 17" heavyweight cars offered. Jerry led the way.
Pecos River Brass Fe-24.w/green roof. Two load capacities, one for when in passenger trains and a higher one when in freight trains. Roof and walk should be black.
K-Line SF baggage car 1821
Williams repainted to NH. Facia is correct scale.
K-Line repainted to NH. Facia is too tall.
John
@rattler21 posted:Today(12/21) I posted a message in the thread PASSENGER TRAINS-Let's See Them...
When you need help from the admins or moderators on something like this, we must have a link to your post. Admins and moderators simply do not have the time to go searching for a post in a long thread. Without a link, we can't help.
To post a link directly to your post, look for this little icon at the bottom right of your post.
Mouse over it, then click on the "Copy Link to Reply". Paste that link into the alert message you post here on the tech support forum.
In this case, we're fortunate that Rob was able to find it and fix it so it appears correctly here in THIS thread. But it still needs fixing in your original post...unless you already fixed it. If not, post the link here and I'll fix the code for you.
UPDATE: I found it and fixed it.
Access to this requires an OGR Forum Supporting Membership
