PS3/2 Diesel Board

Bruce, MTH is selling it all in one package.   This is the stacked board, bottom board and cradle   part number  AE-1000035-5V.   If you need the set to replace a 3V board it is AE-1000035-3V.   This is my all time favorite board.   I stock up good each time a fresh supply shows up at MTH.  I only have a few left and have an order in place.  You are a tech and have access to have your 5 volt sound file converted to a 3 volt file.  Not a big deal.  The only thing to remember is you need special chain files for the 3/2 boards.  If you do not have them handy and need them, let me know.

Go in the MTH tech site and you will see the service bulletin regarding the newer numbers.  

Marty

Thanks, Marty, appreciate it.

yes - please send me the special chain file.  Email is in my profile.

bruce

Will do when I get home later.

Files sent.

Nice job Marty.

Can a regular Joe get a 10 pack discount??? 

20??? 30.....

( I have a lot of engines to upgrade, someday...)

Marty,

Did not receive the special chain files, even checked my spam folder.  Did not get through even on my laptop.

Please resend.  emaii is:    1benzie@comcast.net

thanks,

bruce

Bruce & Marty,

I just sent you the file you need for the PS32 board in a diesel. It's the latest as far as I know, from 9/2017.

Bruce, You had too many 0s in your part number.  The Bottom stacker board is available as a separate part also.

All PS-32 boards come loaded with the correct PS-32 Diesel Chain File and the SD-70 SF.   There is a whole series of PS-32 Chain files depending what you are using the board for.  Coors light, Small Smoke, Electric with Panto, Steam, Trolley, Turbine.  You need to load the correct chain file for your application.  But in this instance the board will have the Diesel chain large smoke in it and you are good.  

I guess I need to spend more time on forum, you already forgot me  G

George, I sent him the list.

George,

Thanks for the info on chain files.  As an example, on a recently purchased 3v diesel ps3 board, the board had an SD70 file already loaded.  I changed the file to the correct file for that diesel and loaded the appropriate chain file.

I did not know the boards were software loaded until I received one.

Thanks,

bruce

Need to be specific, there is no such thing as a 3V PS-3 Diesel.  Diesel PS-3 boards are stand alone PS-3.  Now, if you meant PS-32, got it.  Everything seems to come with Diesel testall.  Flash has to be loaded appropriately for the application.  Otherwise lights, other features and even chuff may not work.  G