Skip to main content

I hope someone has  experience with the DCS app and adding or deleting engines.  I can only get a max of three engines on my layout at a time so the explorer's limitation may be ok for me.  Let's assume I get the explorer running and have three engines entered into the memory.  Tomorrow, if  I decide to run three others- what has to happen to do that?  in the DCS explorer instructions, it notes that "The SS app only allows 3 engines to be added to the system."  So my two questions are: 1) what is the SS app and is it the only one that will run on DCS explorer- can I upgrade? 2) what happens to add the new engines and get rid of the old ones?  

Thanks for the help.

dcs explorer

Attachments

Images (1)
  • dcs explorer
Original Post

Replies sorted oldest to newest

Thanks Joe, I did not ask my questions very well but is it possible to spend the $5 for the software upgrade with the explorer and get 99 locos permanently in residence?  The SS app  seems to be the basic free one but  I could not find that defined anywhere. Will the standard version run on the explorer?

I was also curious how much of a pain it is to get rid of the locos in memory, the instructions mention it but there is no delete tab in the picture they have in the manual.  

Thanks.

capture 2

Attachments

Images (1)
  • capture 2

No, the Explorer will only work the free functions. The two $ upgrades only unlock more functions for the full DCS system. 

It is easy to delete them.

I believe You can have  three engines saved in a phone and different engines saved to another phone or an iPad. I have had two engines on one device and one on another and ran them at the same time. I only own 3 ps3 engines.

Mark W

 

Last edited by MWasko

Add Reply

Post
The DCS Forum is sponsored by

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×