Does anyone have photos of the remote disaasembly and reassembly steps? I had saved Jim Barrett's article but can't find it now that I need it. Did a search on the forum but couldn't find the work that was listed here before the change.
I'm more concerned about re-assmbly as I did get it apart OK. Does the long "tab" on the thumbwheel go under the rubber pushbuttons, etc?
Any help appreciated. Thanks, Joe
joejean63 at hotmail dot com.
Replies sorted oldest to newest
I have some photos of the remote from the old forum on my skydrive, link below, look under DCS Remote
https://skydrive.live.com/?ppu...D2B59150BC05A4C1!104
If you can't get to them, let me know and I can try and post them or send them to you. they are a little small.
Mort
I have this article documented in my notes. It might be the one that you're looking for:
Date Page Type Short Description
201008 | 87 | Article | (Barrett) Replacing a thumbwheel in a remote |
MNort and Walt,
Thank you both very much for the assistance. greatly appreciated. The photos were a great help. I'll have to get a copy of the article Walt referenced.
Thanks again, Joe
Access to this requires an OGR Forum Supporting Membership
