How do you remove an engine from the Legacy controller?
Original Post
Replies sorted oldest to newest
Just write over it. If you really want to remove it, connect to the LSU program with the serial cable and you can clear all the fields.
And put it into TMCC control I assume?
You have to hit the info/prog. mode on your remote after you have selected the locomotive no., dial and manually select the make (diesel, steam, electric, etc.) then select TMCC, or legacy, etc. then hit ok. its all on the remote screen.
doh, never mind... yes just write over it, ...
There is an option to "clear" after pulling up the engine and pressing info.
Thanks for the info.
Originally Posted by Boilermaker1:
There is an option to "clear" after pulling up the engine and pressing info.
So there is, never used that one.
I normally just enter the new parameters, never thought about clearing them. I did do it with the LSU, that's why I know you can do it that way. 
