Hello, I have a 10 AMP resettable circuit breaker, it is for DC power. Is this the correct circuit breaker to use in between the KW and TIU?? I have my Wires from KW posts U and D (20 volt posts) and going to the Fixed In #1 on TIU. My main concern is: Should the fuse be DC or AC power?? Thanks and a fast response is needed.
Replies sorted oldest to newest
That's a fine choice for the breaker. The circuit breakers work equally well on AC or DC, they are thermal breakers. The voltage rating is just a maximum rating of the voltage they'll interrupt.
Current rating is the same in AC or DC.
GRJ how is your outlook? Mine is coming up on the 15th.
My outlook?
After your eye surgery.
Still working on it. They've done the surgery, but my left eye is still not seeing the same as the right, and I have issues with close work right now, even with reading glasses. I have an appointment on Monday to chat with them.
John, I know what your feeling. Some years ago I sustained an injury to my left eye that resulted in optic nerve damage. I usually use over the counter 150's to read but even with 250's I have a hard time soldering (depth perception). I finally broke down and got a resistance set up with a tweezers attachment. My luck is such better now but still a little more time consuming. 
I'm hoping this is a correctable issue. 
Good luck Monday, GRJ, hope they have good news for you.
Mine came out a little different too, but still much better than they were before. I think I told you this before, I still need 1.0 glasses for really close up, but I can actually see things now. Before things were still blurry even with 3.75 glasses, nothing ever came into complete focus.
Access to this requires an OGR Forum Supporting Membership
