Ross and Millhouse Upgrade Kits for a Bowser Turntable

MyToyTrainsOGR Forum Member DIGITAL SUBSCRIBER

Can anyone provide the pro's and con's of the Ross and Millhouse upgrade kits for a 32" Bowser turntable?

My track is already in so does that present any problems?

Do they have indexing options? I already have the Dallee indexing kit so can this also be used with either the Ross or Millhouse kits?

My current Bowser setup hangs up in a few spots with a heavy engine so I am looking for something more robust.

Thanks!

1/26/1211:24 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Rich883OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I installed a Millhouse in my 32" boswer and it worked well. It turns so slowly I didn’t mess with a indexing system. It was easy to line up by eye.

The installation was a snap, and it does not have an impact on the top side of the turntable, so to your question on track, you should not have any issue.

1/26/1212:18 PM

❤️ 0

MyToyTrainsOGR Forum Member DIGITAL SUBSCRIBER

Are there any advantages of one over the other (other than price)?
Thanks.

1/29/127:26 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!