Station stop and go -Dallee vs Zstuff

RICH BOGR Forum Member

looking to add a station stop and timed go feature for my subway,found one by Dallee and one by z stuff,Has anyone used either of these items .any pros or cons.running mth lo v ,conventional and dont like the numerous stops. in conv ,only 1 program is available ,too many stops .only have 1 station on a single loop.
thanks rich

1/25/1211:58 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Dale HOGR Forum Member

I make my own with common components

http://www.jcstudiosinc.com/Bl...d=800&categoryId=426

http://www.jcstudiosinc.com/Bl...d=481&categoryId=426

having said that Dallee stuff usually works well.

Dale H

1/25/121:51 PM

❤️ 0

eddiemOGR Forum Member

Rich,

I have used the Z-stuff board.... worked perfectly 98 times out of every 100 - the other two times, the train mashed into the end bumper and kept running.

I asked Mr. Z about the issue at a train show, and he replied that if you buy the one with the sounds, they work good, but offered no help on how to fix the basic (least expensive) one.

No longer on my layout.

Ed

1/26/126:20 PM

❤️ 0