Skip to main content

I was thinking about building an outdoor O-gauge Train loop through my garden and was wondering if Lionel tubular track can be used for this purpose? This would be much easier than going with a larger G-gauge, as I already have track and rolling stock available for an outdoor layout. I leave in the north where there is snow in the winter (would not run trains then) and hot in the summer. 

Has anyone used Lionel tubular track outdoors?

I want to run the trains using a local battery source, maybe stored in a box car behind the engine, so that I do not have to deal with running electricity through the tracks, and having problems with rusting track and constant track cleaning. Has anyone converted an O-gauge engine to run off of battery power (as opposed to track power)? I know this is possible for G-gauge.

If this is possible, can Lionel tubular track switches be used outdoors? I could cover the switches when non in use, to minimize weather issues, rust, etc occurring at the switch mechanism. 

Thanks for any help or experience with using O-gauge trains outdoors.

Original Post

Replies sorted oldest to newest

There's a guy at york who was advertizing battery conversions. Depending on power demands and run time you can mount it in a tender or in a boxcar and tether it to a locomotive. I dont know the name of the outfit, but its in the Orange hall. 

Atlas O track is nickel silver and the ties are UV stable so it can be used outside and remain conductive. Gargraves makes stainless steel rail track which is also useable outside. 

Either of those would be a better choice than tubular, which will rust before the sun goes down on the day you lay it. 

I've thought about using O-gauge track outdoors be it would have to be on modules that can be taken indoors at night. Some long straight runs could be put on 2x4x12' boards (or whatever) and tack on a couple return loops at the ends.

There are stainless tracks available but the ties wouldn't necessarily be weather resistant over the long run. And any kind of outdoor railroad has maintenance challenges if you're using track power.

George S posted:

Atlas track, with it's brass rail

The Atlas track that we used on our indoor layout is solid nickel silver rail. Must admit that I have never seen any Atlas track with brass rails, but that should work outside too.

and UV resistant ties, would be better suited for outdoors, especially in Toronto.  You might get away with tinplate in a dry, desert area.

 

The G&O garden railroad uses Atlas track for electrically powered trains.  It has been outdoors for over six years without problems.  

You could probably get away with Lionel tubular by using battery power.  It will rust very quickly.  Another potential problem is that you probably can't walk on it without it becoming deformed.  We walk on the G&O's Atlas track all the time.  

Here is a link to information about the G&O:

https://ogrforum.com/t.../the-gandamp-o-story

NH Joe

Thanks for your input. It looks like Atlas may be a better choice than Lionel Tubular. Does all the Atlas track have the UV resistant ties with nickel silver rails?

Tubular will rust, although as long as it doesn't rust right through, it will have a realistic rusted rail look. I can get tubular track cheep, although I don't want to install track that will not last. So I will look into Atlas & Gargraves.

Joe K,  The advise given to use the stainless version of track for your purposes is very wise and should be considered seriously.  The tubular track left outdoors will corrode in no time flat and the tops would become very uneven. 

You mentioned using switches as well.  I would advise not using those old Lionel switches outdoors.  They would have a shorter life expediency than the track.  They were not designed to have water penetrate them nor be left in very humid conditions even if warped in plastic.  They were designed for indoor use only. 

As an experiment, just leave some outside for a while out in one corner of your yard at ground level.  You'll see for yourself how quickly it will deteriorate. 

Dan Padova posted:

I was going to say, paint the track, but even if you did, it would only be a temporary solution, perhaps a couple of years before it became a real maintenance issue.  I'd go with stainless or the Atlas track someone mentioned, if your budget allows.

Painting is almost useless because every time a train passes over the track it will take some paint off(might be only minor but each pass adds up) because of friction between the wheels and the track. Also if you paint the track you lose electrical properties.

Lee Fritz

Joe K posted:

Thanks for your input. It looks like Atlas may be a better choice than Lionel Tubular. Does all the Atlas track have the UV resistant ties with nickel silver rails?

Tubular will rust, although as long as it doesn't rust right through, it will have a realistic rusted rail look. I can get tubular track cheep, although I don't want to install track that will not last. So I will look into Atlas & Gargraves.

All the Atlas track of recent years is UV compatible. By recent, I think the last 10 years, although I'm not certain. Boxes of new track have a UV compatible label. It was a yellow label, but now red.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×