Skip to main content

Hello everyone. Well today O did some more painting of the breezeway ceiling which has the 1st coat .  I also cleaned the garage up wear there is no more junk piled up on the tracks. Well its been just over a month since I started and I know it will take some more time . One thing I am wondering about is painting the floor in the breezeway. How many of you have used  Rust-Oleum  Epoxy Shield paint for this purpose ?

DSC_0012

DSC_0101

DSC_0164

DSC_0007

DSC_0027

DSC_0001

DSC_0010

DSC_0008

DSC_0010

DSC_0011

DSC_0009

DSC_0016

DSC_0009

Attachments

Images (13)
  • DSC_0012
  • DSC_0101
  • DSC_0164
  • DSC_0007
  • DSC_0027
  • DSC_0001
  • DSC_0010
  • DSC_0008
  • DSC_0010
  • DSC_0011
  • DSC_0009
  • DSC_0016
  • DSC_0009

This triple track curve needs to be finished so that the next time Patrick comes over, we can put on the Roseville deck. I painted the track the other day.

 

IMG_5830

Today is ballast day, the first of many!

 

IMG_5831

My weapon of choice, a simple 4" paint brush. I've had this brush for 40 years. Not only is the bristle end good for spreading and placing the ballast, but the handle is perfect for shaping the "ditch" profile.

 

IMG_5832

It seems that whenever the subject of ballasting comes up, Dewey Trogdon suggests the use of the squeeze bottle. He uses cheap ketchup and mustard sets. I happened to have a couple of clear ones in my never ending junk pile. I've tried spray bottles and even a turkey baster. I like the squeeze bottle method. The glue goes right where you want it. Thanks Dewey.

 

IMG_5835

The 2' test section. I still have to spread a little more ballast, but I wanted to see how this was going to turn out.

 

IMG_5834

I may have to thin the mix a little, I did about 1/3 glue, and it had the thickness of maple syrup, not milk.

 

IMG_5833

Joe Wednesday, Matt next Sunday, still working on a day for Patrick, and Jon MIA. I'll just keep chuggin along.

Attachments

Images (6)
  • IMG_5830
  • IMG_5831
  • IMG_5832
  • IMG_5835
  • IMG_5834
  • IMG_5833

Been tackling a bunch of minor jobs now that all electrical and insulating is finished, fingers crossed.  The final electrical check passed with flying colors. at least I haven't smelled anything burning yet.  I'm happy to report that temperatures upstairs during these past few sweltering days are now better than tolerable, although A/C will definitely be needed above 90F. 

 

Firing up this tube tuner/amp was a diversion from the mundane task of room construction.  It once powered one of those aircraft carrier sized '60's consoles, soon to be a built in trainroom feature. 

Electrohome no longer exists but this one still delivers crisp clean sound and deep bass when mated to decent speakers.  An example of what manufacturers did by pulling out all the stops on tube tech right before the move to solid state.  Also doubles as a space heater.

  Bruce

 

Had visitors over yesterday afternoon, one of which was a big HO train guy.  Ran a few trains and talked about the layout.  Everything ran perfectly for a change.

 

Then went out to eat at the Bull Moose restaurant, my favorite train theme place to eat locally.  After a great meal, I jokingly complained to the server that we had not seen any real trains while we were here and before I had finished my sentence, the Amtrak Illinois Zephyr blasted by.  Then on the way back to my house we drove past a section of the BNSF mainline and didn't see any trains. 

 

So I went the back way and as we approached the last RR crossing before we got home, the crossing signals came on and we were first in line to watch a 100 plus car silica sand unit train pass us.  Their were two BNSF engines on the front and two more pushing on the rear.  after it passed, we hurried home and went the crossing in our subdivision and saw it pass again and everyone took videos of it going by.

 

A great train day!

 

Art

Originally Posted by Spence:

Elliot; the ballasted section looks good. I remember a previous photo you posted of bags of ballast. Couldn't find it. Where did you get the ballast?

I would like to know that too.  I have a lot of it coming up as well.  Not nearly as much as you do, but a lot for me.

 

Art

It is supposed to be very hot for the next two days, so I need to spend some time in the cool basement working on the layout.  And I must wash the car today so it's clean for layout tours tomorrow.

 

Plan to paint more already installed track and switches.  Must remember to cover the return air ducts from the basement into the air conditioner so I don't drive us out of the house this time. 

 

Art

Originally Posted by Big_Boy_4005:  Big Boy 4005 - your track work is FABULOUS!!!

This triple track curve needs to be finished so that the next time Patrick comes over, we can put on the Roseville deck. I painted the track the other day.

 

IMG_5830

Today is ballast day, the first of many!

 

IMG_5831

My weapon of choice, a simple 4" paint brush. I've had this brush for 40 years. Not only is the bristle end good for spreading and placing the ballast, but the handle is perfect for shaping the "ditch" profile.

 

IMG_5832

It seems that whenever the subject of ballasting comes up, Dewey Trogdon suggests the use of the squeeze bottle. He uses cheap ketchup and mustard sets. I happened to have a couple of clear ones in my never ending junk pile. I've tried spray bottles and even a turkey baster. I like the squeeze bottle method. The glue goes right where you want it. Thanks Dewey.

 

IMG_5835

The 2' test section. I still have to spread a little more ballast, but I wanted to see how this was going to turn out.

 

IMG_5834

I may have to thin the mix a little, I did about 1/3 glue, and it had the thickness of maple syrup, not milk.

 

IMG_5833

Joe Wednesday, Matt next Sunday, still working on a day for Patrick, and Jon MIA. I'll just keep chuggin along.

 

Technically, I'm not supposed to divulge my source for the ballast. My guy at the quarry swore me to secrecy.

 

This is a product known as head lap or roofing granules, and normally they don't sell it to the public, it goes directly to the shingle manufacturers. I was able to sweet talk my way into getting a good sized stash by contributing to their coffee fund.

 

What you are looking at is 17, 50 pound "sample" bags. The eighteenth is in a 5 gallon bucket that I'm working from. It took me 3 trips to get the nearly half ton.

 

IMG_4948

This quarry also produces ballast for the railroads, so it is hard to get more prototypical than that.

Attachments

Images (1)
  • IMG_4948
Originally Posted by Chugman:

Elliot - I have been secretly thinking that I wanted to get a pickup truck.  This could be another reason I need one. 

 

Great solution and thanks for sharing.

 

Art

Yeah Art, I've been driving a pick up as a second vehicle for over 20 years. They are very handy especially for those Menards runs to grab layout materials. However, the last couple years, my orders have been so large I've just had them deliver those.

 

The delivery guy has been working at my local store since I built the house 15 years ago, and remembers me from back then. Now that he has been bringing layout stuff, I always invite him in to check out the progress. He likes delivering here.

 

I've known about using roofing granules for ballast since the late 80's. The Twin Cities Model Railroad Museum (2 rail club) used them. My problem was I didn't have access to their source. It was actually one of the many ballast topics here on the forum a couple years ago, when someone used the magic word "quarry", that I put 2 and 2 together.

 

JACKPOT!!!

Eliot great progress. It really looks good. 900 pounds of ballast.. Wow!

 

If anyone needs a source of free sand, we are at Hatteras and found plenty this AM while clamming (got two 5 gallon buckets of clams). The sand comes with clam, oyster, and scallop, shells and traces of mud that can be washed out if desired.

 

Now we are getting ready to restart construction on the yacht sales office and will use the sand as basic material for the road in Wanchese/Manteo where the sales office will be located. The shells will be crushed as a base and the mud will remain so that the look is authentic.

 

About half of the interior is complete and as soon as that is done, we will attach the roof, etc. Weathering will be minimal (have to do the roof... you can't hide from the seagulls) because this part of town is an historic area and is well maintained.

 

image

Attachments

Images (1)
  • image

I finally just "TOOK" time to finish trimming and leveling 3 walls of shelves, now I need to shave the edge of one and then paint it all, after that, tomorrow or the next time I get on it, I can screw it off and start tackling the bridge section, it feels good to finally get close on part of it, I even test curved some track on the outside corner, looks like it will be 054 and 048 if my samples are correct.

IMG_2262[1]

IMG_2263[1]

IMG_2264[1]

IMG_2265[1]

IMG_2266[1]

IMG_2267[1]

IMG_2268[1]

IMG_2269[1]

Attachments

Images (8)
  • IMG_2262[1]
  • IMG_2263[1]
  • IMG_2264[1]
  • IMG_2265[1]
  • IMG_2266[1]
  • IMG_2267[1]
  • IMG_2268[1]
  • IMG_2269[1]

Covering up all that pink stuff is now in full swing.  With the hip walls all paneled and almost completely primed, the job at hand is installing the thin 4' X 8' sheets of hardboard. 

 

Down at this end you pretty much get the full effect of curving the hardboard in corners.  This will help keep the layout background somewhat seamless.  Adjoining sheets overlap each other for added support.

The cedar lumber that overlaps and supports the hardboard edges is a failed experiment.  Some other form of finishing treatment will be needed here.  The shelf top in back and off to the right will be future staging yard area, with as much of it left open as possible ( maybe half ) for easy access.  

And finally the view from the other end.  The overlapped seams are plainly visible now.  I plan to snug the sheets together using structural adhesive.  If you look close you'll see no nails or screws fastening sheets to the rafters.  Basically, the curvature holds them tight against the studs and with enough rigidity that bulging insulation only bows them slightly at the upper edges.  Hence those longitudinal boards take care of the slight deformation

At this rate I suspect layout commencement will begin on schedule in September.

 

Bruce

Last edited by brwebster

I spent yesterday doing a bunch of stuff getting ready for Patrick, including more ballasting and some painting. As I had just finished painting the bottom of the Roseville deck black, and was going to put the lid back on the can. Unfortunately, the can was right under the duck under.

 

THWACK... OWWWW!!!

 

I walked into that thing so hard, I bounced off it, and landed on my butt. No serious damage, but it was kind of scary. There's no actual bump, but there is a sore spot. Imagine that.

 

A great afternoon with Patrick today. It started off with Patrick finishing off the Bondo on that pesky section of backdrop, while I continued to work on the ballast. Yesterday, I hung a couple sections of fascia, but today we went crazy and put up another 8. That's a total of 80'!

 

All of this is just tacked in place. Jon will be here on Friday and finish securing it. It runs from Shoreham on the left, around the curve through University on the right...

 

IMG_5848

past what I have nicknamed the "narrows" (the tightest spot of the aisle)...

 

IMG_5850

around Northtown curve...

 

IMG_5851

past the bowl tracks and all the way down to the hump.

 

IMG_5852

When we finished that, Patrick sanded and primed the backdrop.

 

IMG_5842

IMG_5841

IMG_5843

While he was doing that, I was cleaning the glue off the rails, so we could install the Roseville deck.

 

IMG_5844

We had to add scraps of 1/4" Masonite to get the necessary clearance.

 

IMG_5845

Tight but adequate.

 

IMG_5846

In the clear!

 

IMG_5847

Finally, there's this thing. This retaining wall is another "mall remnant". Over the last 22 years I came so close to throwing it in the trash so many times, but yet I hung onto it.

 

It's just a bunch of old GarGraves ties glued onto a Masonite superstructure. But ever since I put it up there on the layout, people have said they really liked it, even though I'm not overly fond of it. With a little modification and some freshening up, I'll make it work, and maybe even like it again. There is going to be an oil loading facility up there, with 2 tracks and plenty of tank cars.

 

IMG_5854

 

Joe tomorrow, Jon Friday and Matt Sunday. Thursday I'll probably get back to that ladder I was working on, and Saturday I have to get all that fascia filled and painted for Matt to do more manual switch throws. Busy, busy, busy!

Attachments

Images (12)
  • IMG_5848
  • IMG_5850
  • IMG_5851
  • IMG_5852
  • IMG_5842
  • IMG_5841
  • IMG_5843
  • IMG_5844
  • IMG_5845
  • IMG_5846
  • IMG_5847
  • IMG_5854

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×
×