Skip to main content

M. Mitchell Marmel posted:

gi-raffe01gi-raffe02

Can you tell what's unusual about this 3376?  Not the missing bits; I have replacement parts for all that... 

Mitch

The answer is that the trucks are a tad unusual.  The 3376 usually has AAR trucks with working couplers, whereas the 3386 has archbar trucks with dummy couplers.  This 3376 has archbar trucks with working couplers, which apparently is not unheard of but not something one sees every day. 

This also proves I'm studying gi-raffe cars entirely too much! 

Mitch

Before and after on the Ensor farmhouse...

The scratch-built house always looked way to clean to me, especially with the train running right behind it. This house would be about 20 years old, give or take, given the time frame of the layout. So, I went perhaps a little too far with weathering, but it definitely looks like it belongs more than it did before.

Before:2016-11-21 22.17.56

After:2016-11-21 22.18.15

I also added mailboxes where the houses are.

2016-11-21 22.38.492016-11-21 22.39.12

Attachments

Images (4)
  • 2016-11-21 22.17.56
  • 2016-11-21 22.18.15
  • 2016-11-21 22.38.49
  • 2016-11-21 22.39.12
Last edited by p51

I worked on my truss bridge and cleaned the scenic materials I'd been using off of the layout, because my neighbor wanted me to show his two sons (5 and 8 yrs old) the trains. So I cleared supplies and tools off the layout and cleaned the lower level tracks. Here are a couple of short videos of what we did.

Attachments

Videos (2)
trim.D12AEA74-5352-491B-A9BE-E6A50EB1663C
trim.24704EA3-70B2-43FB-AB32-417CF82D49A3
Last edited by WP

Today I got bored and broke out the toy teapot for a rough attempt at seeing how a little fantasy excursion train might turn out..IMG_20161121_223845

Being level, skirting, pillars and roof and I'll know better.

IMG_20161121_223754IMG_20161121_223506

The many days before this I've been lazy...except for breaking in the AHM Rivarossi Casey Jones 382 and giggling creepily at the creeping. This thing has some real torque at low volts. I wonder if I can cram smoke into it too?

Attachments

Images (3)
  • IMG_20161121_223845
  • IMG_20161121_223754
  • IMG_20161121_223506
Videos (1)
XiaoYing_Video_1479656370717
p51 posted:

Before and after on the Ensor farmhouse...

The scratch-built house always looked way to clean to me, especially with the train running right behind it. This house would be about 20 years old, give or take, given the time frame of the layout. So, I went perhaps a little too far with weathering, but it definitely looks like it belongs more than it did before.

Before:2016-11-21 22.17.56

After:2016-11-21 22.18.15

I also added mailboxes where the houses are.

2016-11-21 22.38.492016-11-21 22.39.12

Nice touch with the mail box, But the house is still to clean.

More progress........in the past week the top and lower level tracks have been wired, and interior loop plan temporarily adopted (would like to add sidings and accessories later).   Ran 3 trains at once this weekend for the first time! 

Tonight will be installation of track screws, leveling the entrance to a bridge, and general clean up.  Trying to build a shelf under a part of the platform to store locomotives. 

 

Hopefully this weekend will start Christmas village installation. 

 

Adriatic posted:

P51, What did you use to letter the mailboxes?

I used a very small tipped art pen.

suzukovich posted:
 

2016-11-21 22.18.15

Nice touch with the mail box, But the house is still to clean.

Well, I thought about what a house like that would look like run by "the women folk" during the war with the men gone. Paint would be really tough to find and the house would be difficult to keep clean that close to the tracks. The vast majority of houses there were white back then (and most still are) but I decided to make this a different color as most of the non-RR structures are white already. White would be tough to keep clean next to coal-burning locomotives.

But people always took pride in their homes. I made it dirty along the bottom edge from when people had mowed around it (as I've noticed a common theme of green and mud color from mowing on houses in the area, but those are power mowers and these would have been push ones) , and the roof far more dirty as it looked insanely clean before I weathered it.

Like everything else on the layout, I've tried to stop and think what makes the most sense for this time and place when I do anything. Not every structure would have had what I have called the "Malcom Furlow treatment" of ramshackle weathering on every structure. I wanted it like real-life, where not every structure is weathered in the same manner or degree.

Last edited by p51

I did some weathering one of my locomotives, the one I don't use all that terribly often on the layout. I didn't go completely insane with the weathering, but it's probably more heavily weathered than they allowed the locomotive to actually get back in those days. Still, it looked way better and this photograph tells the difference between the weathered and the factory stock ones.2016-11-22 21.45.15

Attachments

Images (1)
  • 2016-11-22 21.45.15

Gi-raffe #18 arrived in the mail today.  Since I make it a policy to have a full set of gi-raffe spare parts on hand, it was a matter of moments to replace the broken actuator arm and missing spring.  Now the gi-raffe is back to factory spec!

GEDC2663

Behind the gi-raffe is Big Red's Williams chassis, with a K-line motor transplant underway courtesy of modeltrainsparts here on OGR! 

To the rear is a Corgi PTC Birney in the process of getting a motor truck from a K-Line handcar...

Mitch

Attachments

Images (1)
  • GEDC2663

Well, it's only plywood and just temporary supports for now. I've been working on it for weeks and had nothing good to show for it. Today, I got to assemble some of the pre-made sections for my high line.

 I normally would be posting this in the 2 rail section. Because it is 3 rail, I put it here. Sorry about your luck!

It will get a back drop and scenery soon. I didn't want to tear the backdrops or get paint on them. Of course if I had planned it better, somethings might have been done in advance. With winter setting in, I'm just throwing it together as I have waited too long. I think something positive is better than nothing.

DSC_1805DSC_1806

 

 

Attachments

Images (2)
  • DSC_1805
  • DSC_1806

I spit polished the chrome on the twin Generals boilers, and gave them each a mixed load of passengers and freight, cleared the "progmess" off the rails. I then gave the ICRR 382 five lighted celestial roof passenger cars to match the locos roof. Running a K-4, it was the most modern loco to hit the rails , so "I ran in the roaring twenties". One more oldie loco and Ill be "stopping in Willoughby" in  the 1800s.

Happy Thanksgiving!

Helpful Hint Of The Day:

GEDC2664

If you're replacing cracked GG-1 sideframes (top) on K-Line trucks, Lionel sideframes (left) will fit nicely after a bit of machining, whereas Williams by Bachmann sideframes (right) are a drop-in replacement.  Presumably, RMT sideframes, being produced from K-Line tooling, would also drop in.  

The gi-raffe (coupler at far right) was unavailable for comment. 

Happy Turkey Day, all!

Mitch

Attachments

Images (1)
  • GEDC2664

I dusted off the layout and ran trains for the first time since April/May.  I don't know if I am losing interest or just very busy at this point in my life, but it was nice to fire everything up and "let off some steam".  Maybe I will post some pics in Weekend Photo Fun this week running trains for the Thanksgiving guests.  I hope everyone has a great today with friends and family.  Happy Thanksgiving.

M. Mitchell Marmel posted:

Helpful Hint Of The Day:

If you're replacing cracked GG-1 sideframes (top) on K-Line trucks, Lionel sideframes (left) will fit nicely after a bit of machining, whereas Williams by Bachmann sideframes (right) are a drop-in replacement.  Presumably, RMT sideframes, being produced from K-Line tooling, would also drop in.  

The gi-raffe (coupler at far right) was unavailable for comment. 

Happy Turkey Day, all!

Mitch

Slick tip, Mitch.

The gi-raffe (coupler at far right) was unavailable for comment. 

Wow!  He sounds like a politician! 

Happy Thanksgiving, Mitch!!

Mark Boyce posted:

Slick tip, Mitch.

The gi-raffe (coupler at far right) was unavailable for comment. 

Wow!  He sounds like a politician! 

Happy Thanksgiving, Mitch!!

(grin) Thankee!  And the same to you! 

fl9turbo2 posted:

IMG_0072Working with the 1st and 2nd generation LCS

I'm minded of the old cartoon in Model Railroader from the 70s with an oval of track being run by a mainframe computer... 

Anyhoo, with the boid in the oven and Shop Supervisors Norma and Sylvia playing in the yard, I've gotten the trucks wired and mounted to the Williams chassis! 

GEDC2666

A test run with a DC powerpack shows that the motors are running fine and in the same direction!  Woot!

Note the rectifier (not bolted in yet).  I'm not horribly fond of electronic reverse units, so we're going brute force on this one.  Rectifier, small capacitor 'borrowed' from the K-Line reverser and a DPDT switch wired as a reverser.

The red and black wires are for directional LED headlights.  I'll keep the wiring in place for possible future use, but I figure I'm just gonna wire the two light bulbs directly to track power for now and keep things old school...

Mitch

Attachments

Images (1)
  • GEDC2666

I have about another 4 1/2-feet to go to complete my elevated trolley line.  Bought some more trolleys at a recent show--  Hey Mitch:  We're up to TWENTY trolleys now !!    Can't get enough of them !!

I started this large layout in my Living Room--  with the General Manager's permission (You know Who !) ,     I was allowed to start expanding into the Dining Room.

My wife fell in love  (at the Great Train Show) with a   K-Line "Great Northern"  Empire Builder A-B-A, six car set.  15-inch cars.   Full lighting,  full Sound and electronics, all diesels smoke,  SIX motors..  etc, etc.

Expensive--but NOW in my place of Abode.  Haven't unpacked as yet !!    The Seller stated:  "I hope you'll have enough power to run it "  !!   (grin)

Will take more photos when I get a chance !!   Happy Thanksgiving to you and your families !!

Cheers.     KRK

 

 

 

 

 

 

Last edited by keyrouteken
Alan Rogers posted:
Moonson posted:

Alan Rogers, I showed my wife your St. Francis Church interior, and we both cheered right out loud for your skills, results, and success! WOW! And WOW!

frankM

Thank you , Frank!!!

The pews, lectern and altar are from 

http://www.outbackmodels.com/

I have a  kit for the church available on Ebay.

Happy holidays!!!

 

Alan,

Your church interior is great.  I want to scratch build the church we were married in, but it will probably wait until I retire in a few years , because I have a new layout to build. 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×