Skip to main content

So many things going wrong today... yesterday this engine ran fine (MTH SD-24 with PS2). Later that day I took everything off the table and installed fake grass carpet. Put all the track back on and ran my sd80 for awhile then decided to use this engine and nope nothing happens. I deleted it off dcs then ran it in conv. and did a factory restart on it. But on DCS it just says engine not on track. I also tried to recover it with no success. The battery isn’t dead either. When i give the track power while hooked up with DCS, something in the engine “clicks” but no lights or sounds come on. Runs fine in conv. though

Original Post

Replies sorted oldest to newest

How strong is the track signal test? The PS2 engine should click at power up and stay dark and silent until called to start. 

I'd like to help. I just had my G scale Big Boy do this and the remote would only say engine not on track. Funny, for some reason I tried the phone, and the app found the engine right away. Sometimes I can't help but wonder if there's software bugs coming into play.

Add Reply

Post
The DCS Forum is sponsored by
×
×
×
×
Link copied to your clipboard.
×
×