All American made Lionel product.
Get over it. It ain't going to happen at least in our lifetime or near the end of it.
All American made Lionel product.
I would like Lionel to release a matching set of passenger cars for the beautiful Texas Special FT diesel set.
TEX
Steve
Some scale Legacy equipped Boston and Maine steam would be nice. B&M Pacific #3713 (undergoing restoration at Steamtown) is my top choice. Other than that, an Atlantic, a Ten-wheeler, or even a rerun (with a different cab number) of the B&M Mogul.
Beside being made in the USA. I would like to see the rolling stock compatible with Kadee couplers and for them to drop "built by Lionel" off the sides of the cars.
Some more New England road names would be nice and how about some Rutland steam
Lionmaster RDC Budd cars 18" long (Shorter then scale - Longer then the current 15" cars) With Legacy !! NYC to start
How about a Pennsy Decapod (2-10-0) with long distance tender with legacy and all the goodies.
A Pere Marquette Mikado with Legacy.
A nice Dreyfuss Hudson with Legacy.
How about a reissue of the Southern Crescent Limited set with engine and cars with legacy.
British outline engines (large or small), specifically Henry and Gordon.
Realistic and accurate delivery schedule.
Pete
I hit Lionel up for a Legacy Scale Turbine at the WGH show, but no indication that it was anywhere near.
I also would like to see a UP Big Blow Turbine with both the turbine and the diesel helper sound
How about an Adams Family Vision line locomotive. Goes 6 feet down track and blows up!
Some already do that.
I'd like something "new and clever" in the Polar Express line.
I'd like some O-84 and larger turnouts in FasTrack.
I'd like some larger radius FasTrack curves.
Eric S.
Marty how about a chip to remind hobby store oweners about orders placed vince
Marty how about a chip to remind hobby store oweners about orders placed vince
Scale 44 Tonner with command and electro couplers.
tom
El Rexene Plastics ACF Center Flow Cylindrical 3-Bay Covered Hopper
El Rexene Plastics ACF Center Flow teardrop 4-Bay Covered Hopper.
Andrew
Falcon Service
Chicago and Northwestern Pullman-Standard 60' Single-Door Boxcar
Andrew
Falcon Service
I like the conventional classics series
yet to be remade
2359 B&M GP-9
IC F-3 AB units
2351 MR EP-5
Love switchers---616 SF, 611 JC ???
surprise me
Keeping it simple; I'd like to see a command controlled 44 ton switcher with dual powered couplers. Lionel has shown that it can make the smaller equipment with TMCC (inspection car and trackmobile). If Lionel has access to the Madison Hardware trademark, it also would be nice to see a similar looking building utilizing Miller Eng signage.
Attachments
More Vision or Legacy PRR power that can operate on 031.
Wonder how many operators out there use Lionel's super reliable 022 switches as their main switch tracks? I know I do.
I would also vote to keep "Blt by Lionel" on all rolling stock. (but that's just me)
I would also vote to keep "Blt by Lionel" on all rolling stock. (but that's just me)
Yes, put it on all rolling stock. BUT...
Display it prominently on the non-scale/traditional stuff. On standard O scale stuff, put it underneath the cars.
D&H U33C, "scale" Challenger and the "Sharks"!!! nuf said!
Cheers!
Attachments
A Lionmaster sized Budd RDC cars (18" long vs. the 15" current ones)
With Legacy
RS-1, detailed to represent a loco requisitioned by the US Army in WW II.
A new Legacy Backshop
Legacy inter-modal crane with sounds
a legacy tender, where the coal level drops as the engine runs. Bring it to a coal chute, and the coal level rises back up to simulate it being refilled with coal.
Legacy crew talk caboose with smoke
I like this idea!
How about some stuff K-Line cataloged but never made?
I'de love a set of extruded aluminum Budd cars in scale and 15" length.
And Lionel should make the 192 Control tower in the CORRECT postwar colors
Neil
I like the conventional classics series
yet to be remade
2359 B&M GP-9
IC F-3 AB units
2351 MR EP-5
Love switchers---616 SF, 611 JC ???
surprise me
I would be up for any of these as conventional classics. The EP5 would be a good choice. Another switcher would be cool. Also a 665, 1615 or a 623 would be nice!
Smoke unit upgrade for older steam engines.
Diesel Horn upgrade for older engines that didnt have any horn.
Postwar Celebration/Conventional Classics Military Pyro Flat Car Sets!!!
A Vision Line NYC H10 Mikado.
A C&O 614
A set of buildings for The Polar Express that match the ones from the movie
A set of buildings for The Hogwarts Express, like the town of Hogsmead and Hogwarts Castle
More Pere Marquette Rolling Stock
An Afordable Legacy controlled Turntable
More animated accessories and rolling stock.
No complaints from me on ANY Lionel Product, they are all Great!!
More standard gauge like the Hiawatha and Commodore Vanderbilt.
Now that Lionel has the casting for the Vision Hudson, make one -- perhaps less detail if necessary to have a profit -- in a Conventional Classic mode or Traditional line. No electronics except Rail Sounds. I don't think the scale sized Hudson saturation point has been reached yet. I am always interested in more. Dick
Put the roller bearing trucks with operating couplers used for the Bathtub Coal Gondolas on the older, plastic bodied Standard O freight cars.
SOUTHERN 50' Modern Boxcar
SOUTHERN Exterior-Braced 50' Double-Door Boxcar
SOUTHERN ACF Center Flow 2-Bay Covered Hopper
Southern Pacific Exterior-Braced 50' Double-Door Boxcar
Northern Pacific Exterior-Braced 50' Double-Door Boxcar
Chicago & NorthWestern 50' Modern Boxcar in Safety Yellow "Zito Yellow" 1980's scheme.
Chicago & NorthWestern Exterior-Braced 50' Double-Door Boxcar repainted in the 1990's Traditional Yellow with the small NORTHWESTERN herald.
Andrew
Falcon Service