My Atlas Turntable and Three Stall Roundhouse

Grand Pa PaOGR Forum Member

I have not been on-line with you for quite a while. I am doing some rework and completing additions to my three rail layout --- it is likened to an airport blown apart. It still has a double mainline using some ross wooden ties and some phamptom track. Now it will also have some Lionel Fastrack. My walk-in attic knee wall room (10' x 27') is now full - will post pictures later.

Question/problem(s): Trying to hook up my turntable to the control panel location (lost instructions). So, I need instructions for the on-grade Atlas turntable. Also, it seems that the best

track to use (from my inventory) is Ross for the on-grade tie ends to the turntable or I could cut some of the ends (of the ballast) of the Fasttrack to make a snug fit to the rdtable. Ross track fits the stalls perfectly except I will need to raise the track slightly.

Any ideas will be appreciated ---

11/20/144:52 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Mike CTOGR Forum Member

Here is a link to the Atlas O Turntable Manual. Click on the underlined phrase to link.

11/20/145:12 PM

❤️ 0

Grand Pa PaOGR Forum Member

Thanks Mike CT for your quick response- great help - that is the result sought - the stall hookup especially - getting much usuage out of my 50 yr old Waller Soldering gun that was originally bought to build my 70 watt amphifier, fm tuner, and pre-amphifier (Dynakit 1964) that still works and provides that still great sound quality...

looking forward to getting my consists back on the layout so I can take some pictures that will help me with scenery placements etc

11/21/1412:31 AM

❤️ 1

Ron045OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have the Atlas TT too. My layout is Scaletrax but I have found Atlas Track works best with the Atlas TT. I have two leads to the TT. One lead is Atlas and the other is a built up Scaletrax. That was difficult to fit just right. All of the tracks around the TT for engines are Atlas track. I'll see if I can post some pics tonight.

Ron

11/21/146:58 AM

❤️ 0

Larry Sr.OGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

If you are referring to the 6910 here are a few photo of what I started . I stopped due to the fact it just took up to much space. This did work and fit nicely Just info for you. The only shims were under the fastrack right where it meets the TT

Larry