I have an older Lionel 4-4-2 with TMCC and Odyssey that runs fine in TMCC mode, but very slow in conventional regardless of the throttle setting. What gives?
Original Post
Replies sorted oldest to newest
when you run it in conventional are you disconnecting the TMCC from the layout?
Good question, I have one doing the exact same thing, has to be a way to reset it.
I believe there's a way to disable Odyssey in conventional mode, that may be the issue. There's supposedly some magic sequence of voltage swings and whistle/bell presses that will disable it on locomotives with no switch.
The TMCC is disconnected. I would hate to give up the Odyssey speed control while in conventional mode. Is there any other way?
Not that I know of, I don't have any similarly equipped locomotive to test with.
