Skip to main content

Replies sorted oldest to newest

So it appears that the information that traditional smaller, less expensive O gauge stuff would only be on-line was faulty?  The 44 Tonners at $250 MSRP seem like good value.  The ZW-L is now close to $1000 dollars MSRP.  Thomas set which was 200 bucks is now 250 bucks.  That's a big increase.  Glad I already have a ZW-L .  Like Marty, I'll be ordering the Cab 3 base.

I also notice the American Flyer catalog, while small compared with the 250 page O gauge behemoth, is 44 pages.  Should please someone, I'd hope.

This catalog suggests that Lionel's financial health is,  as stated, reasonably good to great.  You don't plan for this huge product variety and amount of innovation if you are the equivalent of Lionel in 1968.  This catalog speaks to optimism and ambition, not doom and gloom.  Good news for the hobby considering the loss of K-Line, Weaver and the downsizing of MTH.

Last edited by Landsteiner
@Landsteiner posted:

So it appears that the information that traditional smaller, less expensive O gauge stuff would only be on-line was faulty?  The 44 Tonners at $250 MSRP seem like good value.  The ZW-L is now close to $1000 dollars MSRP.  Glad I already have one .  Like Marty, I'll be ordering the Cab 3 base.

I also notice the American Flyer catalog, while small compared with the 250 page O gauge behemoth, is 44 pages.  Should please someone, I'd hope.

No, the information was correct. The hard copies of the catalog only contain the higher end scale stuff whereas the digital version contains both scale and traditional.

@pbuff posted:

So is the Safety steam the "New Feature to be announced" on the N&W Class A? Also, why does the Min Curve say O54 on page 16, but O72 on the previous page?  Typo?

Someone correct me if I’m wrong, but I believe the new BIG announcement was being able to address the engine with 4 digits as opposed to 2.   Other engines have already had variations on where steam sprays out of the engine or tender.

Another notable feature is that I believe he said there was a speaker in the engine… I don’t think that’s been done before?

There are a couple of videos fromLionel on YouTube in regards to the new engine and the CAB3. They don’t go into too much depth but they do a high-level overview of the features.

@MartyE posted:

I'm definitely in for the Base 3 to start.

Base 3

My question is, has Lionel discontinued the manufacturing of any handheld controllers?  It’s great that the CAB3 is compatible with the CAB1 in the CAB2 handheld remotes, but if you don’t have your hands on either of those emotes already, are you forced to use the phone app?

I like that the CAB3 allow control of all these operating systems.  

C4FBB4F5-83BD-4E1E-ACED-1D8BFE854EEA

Attachments

Images (1)
  • C4FBB4F5-83BD-4E1E-ACED-1D8BFE854EEA
@VJandP posted:

My question is, has Lionel discontinued the manufacturing of any handheld controllers?  It’s great that the CAB3 is compatible with the CAB1 in the CAB2 handheld remotes, but if you don’t have your hands on either of those emotes already, are you forced to use the phone app?

I like that the CAB3 allow control of all these operating systems.  

C4FBB4F5-83BD-4E1E-ACED-1D8BFE854EEA

The CAB1 L was in the catalog, but there is not a Cab 2 to be found in the new catalog.

So far it looks like the NYC 0-6-0 and B&O Bobber Caboose. I would also consider the PRR 0-6-0 if they make the tender MTH previously made for that version. The catalog art shows them all the same. WWII Class A would be nice but doubt I spring for one of those. I always liked the B&A Berkshire but probably not enough with the current tally I would have so far. I also like the Angela Trotta Thomas Hudson boxcar.

Last edited by Randy_B
@MartyE posted:

Yep.

Disappointing.  That doesn’t move the needle for me at all.   And I resent the tease of something so “exciting” they kept it a secret and then its something like that.   I assumed it would be a new smoke or other operating feature.   (No disrespect to anyone who thinks that’s an awesome innovation…I don’t have enough operating Lionel stuff for 2 digit addressing to be a problem for me)

Been wanting one of the Genesis Lion Chief Plus 2.0 locos since they were initially cataloged last year. I knew from Ryan's comments that they would be offering more, especially the various Anniversary liveries.

I'm in on the Midnight Blue #100 version. Great looking loco.

But will need some suitable passenger car sets. Not sure those 2-packs on the following pages are what I want. Will be looking around for some other options, including other manufacturers.

EDIT: Offhand, the other item that caught my eye was one of the LC Plus 2.0 Hudsons. If I do get one of those, Lionel Lines is likely to be my choice

Last edited by johnstrains
@Keith1366 posted:

It does look like they are not wanting to make the remotes and wanting to move to using your phone or tablet to control trains with, which for someone like me just getting setup in O scale will leave me without a remote. Phone control is ok but I would rather have a remote.

As posted above the Cab1L is still being made.  I'm not sure it's a matter of wanting to make a Cab3 Hardware remote but able.  Just too much changing too quickly IMO.

I’m a sucker for scale PolEx stuff. I really like the thought of this car, but it appears to be a blend of both versions of the scale PolEx passenger cars. The lettering is above the stripe and windows which is consistent with the early release of the cars (black roof).  But, it has a snow roof like the second release (which had the lettering below the stripe and windows). In other words, as illustrated, it’s not correct for either release.

I’m in if they make a proper black roof version to match the original release. ED17D217-C950-4788-9BBC-FD2A9EB2B624

Attachments

Images (1)
  • ED17D217-C950-4788-9BBC-FD2A9EB2B624

I’m a sucker for scale PolEx stuff. I really like the thought of this car, but it appears to be a blend of both versions of the scale PolEx passenger cars. The lettering is above the stripe and windows which is consistent with the early release of the cars (black roof).  But, it has a snow roof like the second release (which had the lettering below the stripe and windows). In other words, as illustrated, it’s not correct for either release.

I’m in if they make a proper black roof version to match the original release. ED17D217-C950-4788-9BBC-FD2A9EB2B624

I'm in for that as well.

@MartyE posted:

I'm in for that as well.

Do you have white roof or black roof cars?  Does the “snow” on the white roof cars have a thickness/texture or is it smooth such that it could be painted black to match the early cars?  

Would be great to know what they are actually intending to build.  I can’t imagine they are planning to release it as drawn given it matches neither release of the exiting cars.  

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Ste 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×